581952
9
Zoom out
Zoom in
Previous page
1/147
Next page
7
The door can be changed from right-hinged to left-hinged and vice versa as
follows:
Reversible door
1. Lay the appliance on its
back and loosen the upper
hinge.
2. Remove the upper hinge. 3. Rotate the glass door
through 180° (on WSN 1412
LT, pull the handle to loosen it
on the inside from beneath the
sealing strip).
4. Carefully remove the
covers on the side of the
plinth using a flat-headed
screwdriver.
5. Pull up the hinge pin...
...and fit it on the opposite
side.
6. Unscrew the lock pin using
a flat-headed screwdriver.
7. When the lock pin has
been loosened completely,
pull it up together with the lock
cylinder and refit on opposite
side.
8. Click the covers into place
on the plinth sides on the
opposite side.
9. Fit the door onto the bottom
pin, fit the top hinge and
tighten securely.
10. After reversing the door, it is important to check that the sealing strip provides a tight seal all
the way round. If it does not, carefully heat the strip all the way round using a hair dryer. Then
ease the strip outwards slightly so that it forms a tight seal against the cabinet. Be careful not to
heat the strip so much that it melts!
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg WSN 1412 LT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WSN 1412 LT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish, Norwegian as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info