Manual Blomberg WNF 7361 SCE20 (page 11 of 68) (English, German, Italian)

582069

Zoom out

Zoom in

1/68

Auxiliary function selection

Select the desired auxiliary functions before starting the

programme. Furthermore, you may also select or cancel

auxiliary functions that are suitable to the running programme

withoutpressingtheStart/Pausebuttonwhenthemachine

is operating. For this, the machine must be in a step before

the auxiliary function you are going to select or cancel.

Iftheauxiliaryfunctioncannotbeselectedorcanceled,light

of the relevant auxiliary function will blink 3 times to warn the

user.

 Somefunctionscannotbeselectedtogether.Ifasecond

auxiliary function conflicting with the first one is selected

before starting the machine, the function selected

first will be canceled and the second auxiliary function

selection will remain active. For example, if you want to

select Quick Wash after you have selected the Prewash,

Prewash will be canceled and Quick Wash will remain

active.

An auxiliary function that is not compatible with the

programme cannot be selected. (See "Programme and

consumption table")

Auxiliary Function buttons may vary according to the

model of the machine.

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not

using the Prewash will save energy, water, detergent and

time.

Prewash without detergent is recommended for tulle

and curtains.

• Quick Wash

This function can be used in Cottons and Synthetics

programmes.Itdecreasesthewashingtimesandalsothe

number of rinsing steps for lightly soiled laundry.

When you select this function, load your machine

with half of the maximum laundry specified in the

programme table.

• Rinse Plus

This function enables the machine to make another rinsing in

addition to the one already made after the main wash. Thus,

the risk for sensitive skins (babies, allergic skins, etc.) to be

effected by the minimal detergent remnants on the laundry

can be reduced.

• Anti-Creasing

This function creases the clothes lesser when they are being

washed.Drummovementisreducedandspinningspeedis

limitedtopreventcreasing.Inaddition,washingisdonewitha

higher water level.

• Rinse Hold

Ifyouarenotgoingtounloadyourclothesimmediatelyafter

the programme completes, you may use rinse hold function

to keep your laundry in the final rinsing water in order to

prevent them from getting wrinkled when there is no water

inthemachine.PressStart/Pausebuttonafterthisprocess

if you want to drain the water without spinning your laundry.

Programme will resume and complete after draining the

water.

Ifyouwanttospinthelaundryheldinwater,adjusttheSpin

SpeedandpressStart/Pausebutton.

The programme resumes. Water is drained, laundry is spun

and the programme is completed.

• Soaking

The Soaking auxiliary function ensures better removal of

stains ingrained into the clothes by holding them in the

detergent water prior to startup of the programme.

Delayed Start

WiththeDelayedStartfunctionthestartupoftheprogramme

maybedelayedupto19hours.Delayedstarttimecanbe

increasedbyincrementsof1hour.

 DonotuseliquiddetergentswhenyousetDelayed

Start! There is the risk of staining of the clothes.

Open the loading door, place the laundry and put detergent,

etc. Select the washing programme, temperature, spin speed

and,ifrequired,theauxiliaryfunctions.Setthedesiredtimeby

pressingtheDelayedStartbutton.PressStart/Pausebutton.

Thedelayedstarttimeyouhavesetisdisplayed.Delayedstart

countdown starts. “_” symbol next to the delayed start time

moves up and down on the display.

Additional laundry may be loaded during the delayed

start period.

At the end of the countdown, duration of the selected

programme will be displayed. “_” symbol will disappear and

the selected programme will start.

Changing the Delayed Start period

Ifyouwanttochangethetimeduringcountdown:

PressDelayedStartbutton.Timewillincreaseby1houreach

timeyoupressthebutton.Ifyouwanttodecreasethedelayed

starttime,pressDelayedStartbuttonrepeatedlyuntilthe

desired delayed start time appears on the display.

Canceling the Delayed Start function

Ifyouwanttocancelthedelayedstartcountdownandstart

the programme immediately:

SettheDelayedStartperiodtozeroorturntheProgramme

Selectionknobtoanyprogramme.Thus,DelayedStart

functionwillbecanceled.TheEnd/Cancellightflashes

continuously. Then, select the programme you want to run

again.PressStart/Pausebuttontostarttheprogramme.

Starting the programme

PressStart/Pausebuttontostarttheprogramme.

Programmefollow-uplightshowingthestartupofthe

programme will turn on.

 Ifnoprogrammeisstartedornokeyispressedwithin

1minuteduringprogrammeselectionprocess,the

machine will switch to Pause mode and the illumination

level of the temperature, speed and loading door

indicator lights will decrease. Other indicator lights and

indicators will turn off. Once the Programme Selection

knob is rotated or any button is pressed, indicator lights

and indicators will turn on again.

Child Lock

UseChildLockfunctiontopreventchildrenfromtampering

with the machine. Thus you can avoid any changes in a

running programme.

 IftheProgrammeSelectionknobisturnedwhenthe

ChildLockisactive,"Con"appearsonthedisplay.

TheChildLockdoesnotallowanychangeinthe

programmes and the selected temperature, speed and

auxiliary functions.

Even if another programme is selected with the

ProgrammeSelectionknobwhiletheChildLockis

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WNF 7361 SCE20 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg WNF 7361 SCE20 Manual

Product: