Manual Blomberg WNF 7361 SCE20 (page 4 of 68) (English, German, Italian)

582069

Zoom out

Zoom in

1/68

• Topreventflowingofdirtywaterbackintothemachine

and to allow for easy discharge, do not immerse the

hose end into the dirty water or drive it in the drain

morethan15cm.Ifitistoolong,cutitshort.

• Theendofthehoseshouldnotbebent,itshouldnotbe

stepped on and the hose must not be pinched between

the drain and the machine.

• Ifthelengthofthehoseistooshort,useitbyadding

anoriginalextensionhose.Lengthofthehosemay

not be longer than 3.2 m. To avoid water leak failures,

the connection between the extension hose and the

drain hose of the product must be fitted well with an

appropriate clamp as not to come off and leak.

Adjusting the feet

 Inordertoensurethattheproductoperatesmoresilent

andvibration-free,itmuststandlevelandbalancedon

its feet. Balance the machine by adjusting the feet.

Otherwise, the product may move from its place and

cause crushing and vibration problems.

1. Loosenthelocknutsonthefeetbyhand.

2. Adjust the feet until the product stands level and

balanced.

3. Tighten all lock nuts again by hand.

 Donotuseanytoolstoloosenthelocknuts.Otherwise,

they will get damaged.

Electrical connection

Connect the product to a grounded outlet protected by a fuse

complying with the values in the "Technical specifications"

table. Our company shall not be liable for any damages that

will arise when the product is used without grounding in

accordance with the local regulations.

• Connectionmustcomplywithnationalregulations.

• Powercableplugmustbewithineasyreachafter

installation.

• Thevoltageandallowedfuseorbreakerprotectionare

specifiedinthe“Technicalspecifications”section.Ifthe

current value of the fuse or breaker in the house is less

than16Amps,haveaqualifiedelectricianinstalla16

Amp fuse.

• Thespecifiedvoltagemustbeequaltoyourmains

voltage.

• Donotmakeconnectionsviaextensioncablesormulti-

plugs.

 Damagedpowercablesmustbereplacedbythe

Authorized Service Agents.

First use

Before starting to use the product, make sure that all

preparations are made in accordance with the instructions in

sections"Importantsafetyinstructions"and"Installation".

To prepare the product for washing laundry, perform first

operationinDrumCleaningprogramme.Ifyourmachineis

notfeaturedwithDrumCleaningprogramme,useCottons-90

programme and select Additional Water or Extra Rinse

auxiliary functions as well. Before starting the programme,

putmax.100gofpowderanti-limescaleintothemain

washdetergentcompartment(compartmentnr.II).Ifthe

anti-limescaleisintabletform,putonlyonetabletinto

compartmentnr.II.Drytheinsideofthebellowwithaclean

piece of cloth after the programme has come to an end.

 Useananti-limescalesuitableforthewashing

machines.

Some water might have remained in the product due to

thequalitycontrolprocessesintheproduction.Itisnot

harmful for the product.

Disposing of packaging material

Packagingmaterialsaredangeroustochildren.Keep

packaging materials in a safe place away from reach of the

children.

Packaging materials of the product are manufactured from

recyclablematerials.Disposeofthemproperlyandsortin

accordancewithrecycledwasteinstructions.Donotdispose

of them with normal domestic waste.

Transportation of the product

Unplugtheproductbeforetransportingit.Removewaterdrain

andwatersupplyconnections.Draintheremainingwaterin

theproductcompletely;see,"Drainingremainingwaterand

cleaningthepumpfilter".Installtransportationsafetyboltsin

thereverseorderofremovalprocedure;see,"Removingthe

transportation locks".

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WNF 7361 SCE20 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg WNF 7361 SCE20 Manual

Product: