582085

Blomberg WNF 6461 AE20 Manual

14
Zoom out
Zoom in
Previous page
1/76
Next page
14
EN
display starts flashing.
Canceling the Delayed Start function
Ifyouwanttocancelthedelayedstartcountdown
and start the programme immediately:
PressStart/Pause/Cancelbutton.“:”signinthe
middle of the delayed start time on the display stops
flashing.Startsymboldisappears.Pausesymbol
andDelayedStartsymbolflashes.Decreasethe
delayedstarttimebypressingtheDelayedStart
-button.Programmedurationappearsafter30
minutes.PressStart/Pause/Cancelbuttonto
start the programme.
Starting the programme
PressStart/Pause/Cancelbuttontostartthe
programme.Startsymbolshowingthestartupof
the programme will turn on. Loading door is locked
andDoorLockedsymbolappearsonthedisplay.
Thesymbolofthestepfromwhichtheprogramme
has started appears on the display (Prewash, Main
Wash, Rinse, Softener and Spin).
Progress of programme
Progress of a running programme is indicated on
thedisplaywithasetofsymbols.
Relevantsymbolappearsonthedisplayat
thebeginningofeachprogrammestepandall
symbolsremainlitattheendoftheprogramme.
Thefarthermostrightsymbolindicatesthecurrent
programme step.
Prewash
IfthePrewashauxiliaryfunctionisselected,
Prewashsymbolappearsonthedisplayindicating
that the prewash step has started.
Main Wash
MainWashsymbolindicatingthatthemainwash
step has started appears on the display.
Rinse
Rinsesymbolindicatingthattherinsingstephas
started appears on the display.
Softener
Softenersymbolindicatingthatthesoftenerstep
has started appears on the display.
Spin
Appearsatthebeginningofthefinalspinstep
and remains lit during Spin and Pump special
programmes.
C
Ifthemachinedoesnotpasstothespinning
step,RinseHoldfunctionmightbeactiveorthe
automaticunbalancedloaddetectionsystem
mightbeactivatedduetotheunbalanced
distributionofthelaundryinthemachine.
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
whenthewaterlevelisunsuitable.
DoorLockedsymbolappearswhentheloading
doorislocked.Thissymbolwillflashuntilthe
loadingdoorbecomesreadytoopenwhen
programme completes or the machine is paused.
Donotforcetoopentheloadingdoorinthisstep.
Symboldisappearswhenthedoorisreadyto
open.Youcanopenthedoorwhenthesymbol
disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pause/Cancelbuttontoswitch
themachinetopausemode.Pausesymbol
appears on the display indicating that the machine
ispaused.Startsymboldisappears.
Changing the speed and temperature
settings for auxiliary functions
Dependingonthesteptheprogrammehas
reached, you may cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
PresstheStart/Pause/Cancelbuttontoswitch
the machine to pause mode. The programme
follow-uplightoftherelevantstepduringwhichthe
machine was switched into the pause mode will
flash. WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthe
laundry.ClosetheLoadingDoor.Makechangesin
auxiliary functions, temperature and speed settings
ifnecessary.PressStart/Pause/Cancelbuttonto
start the machine.
C
The loading door will not open if the water
temperature in the machine is high or the water
levelisabovethedooropening.
Child Lock
UseChildLockfunctiontopreventchildrenfrom
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
You can switch on and off the machine with
On/OffbuttonwhentheChildLockisactive.
When you switch on the machine again,
programme will resume from where it has
stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
AuxiliaryFunctionbuttons
for 3 seconds. “Con” appears on the display.
C
Same phrase will appear on the display if you
pressanybuttonwhenChildLockisenabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
AuxiliaryFunctionbuttons
for3seconds.“COFF”appearsonthedisplay.
C
Donotforgettodisablethechildlockatthe
endoftheprogrammeifitwasenabledbefore.
Otherwise,machinewillnotallowtoselecta
new programme.
Canceling the programme
PressandholdStart/Pause/Cancelbuttonfor3
seconds.Startsymbolflashes.Symbolofthestep
at which the programme was cancelled remains lit.
"END" appears on the display and the programme
is cancelled.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg WNF 6461 AE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WNF 6461 AE20 in the language / languages: English, Danish as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info