Manual Blomberg WNF 6100 WEN (page 11 of 63) (English, Danish)

582094

Zoom out

Zoom in

1/63

Auxiliary function selection

Selectthedesiredauxiliaryfunctionsbeforestarting

the programme. Furthermore, you can also select

orcancelauxiliaryfunctionsthataresuitableto

the running programme without pressing the Start

/Pause/Cancelbuttonwhenthemachineis

operating.Forthis,themachinemustbeinastep

beforetheauxiliaryfunctionyouaregoingtoselect

or cancel.

Iftheauxiliaryfunctioncannotbeselectedor

canceled, light of the relevant auxiliary function will

blink3timestowarntheuser.

 Somefunctionscannotbeselectedtogether.Ifa

second auxiliary function conflicting with the first

oneisselectedbeforestartingthemachine,the

functionselectedfirstwillbecanceledandthe

second auxiliary function selection will remain

active.

 Anauxiliaryfunctionthatisnotcompatible

withtheprogrammecannotbeselected.(See

"Programmeandconsumptiontable")

 AuxiliaryFunctionbuttonsmayvaryaccordingto

the model of the machine.

• Prewash

A Prewash is only worthwhile for heavily soiled

laundry. Not using the Prewash will save energy,

water, detergent and time.

As their meshed texture causes excessive

foaming,washtheveils/tullebyputtinglittle

amount of detergent into the main wash

compartment.Donotputdetergentinthe

prewash compartment.

• Rinse Plus

Thisfunctionenablesthemachinetomakeanother

rinsing in addition to the one already made after the

mainwash.Thus,theriskforsensitiveskins(babies,

allergicskins,etc.)tobeeffectedbytheminimal

detergentremnantsonthelaundrycanbereduced.

• Rinse Hold

Ifyouarenotgoingtounloadyourclothes

immediately after the programme completes, you

can use rinse hold function to keep your laundry

in the final rinsing water in order to prevent them

from getting wrinkled when there is no water in the

machine.

InmodelsequippedwithSpinSpeedAdjustment

button,selecttheSpinSpeedandpressStart/

Pause/Cancelbuttonifyouwanttospinthelaundry

held in water.

InmodelsnotequippedwithSpinSpeedAdjustment

button,selectSpin+Pumpprogrammeifyouwantto

spin your laundry held in water.

 Inthesemodels,youneedtostopthemachine

bypressingStart/Pause/Cancelbutton

beforeswitchingtospinstepandafterpump

step is completed and the water in the machine

is drained. Thus, water inside the machine is

drained and your laundry is not spun.

• No Heat

Usethisfunctionifyouwanttowashyourlaundryin

cold water.

• No Spin

Usethisfunctionifyoudonotwantyourclothesbe

spun at the end of the programme.

• Spin speed reduction

This function allows spinning of laundry at a speed

lower than the maximum spin speed of the machine.

WhenSpinReductionbuttonispressed,spinspeed

willbelimitedtotheminimumspeedspecifiedonthe

control panel.

Starting the programme

PressStart/Pause/Cancelbuttontostartthe

programme.Start/Pause/Cancelbuttonlightsup

to indicate that the programme has started. Loading

doorislockedandLoadingDoorlightturnsoff.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tampering with the machine. Thus you can avoid any

changes in a running programme.

 YoucanswitchonandoffthemachinewithOn

/OffbuttonwhentheChildLockisactive.When

you switch on the machine again, programme

will resume from where it has stopped with the

childlockenabled.

To activate the Child Lock:

Press and hold 1

and 2

Auxiliary Function

buttonsfor3secondssimultaneouslyafterwashing

programme has started. The 1

Auxiliary Function

light flashes continuously.

To deactivate the Child Lock:

Childlockmustbedeactivatedtostartanew

programme after the programme has finished or to

interrupt a running program.

Press and hold 1

and 2

AuxiliaryFunctionbuttons

for3secondssimultaneouslytodisablechildlock.

Progress of programme

Progressofarunningprogrammecanbefollowed

fromtheProgrammeFollow-upindicator.Atthe

beginningofeveryprogrammestep,therelevant

indicator light will turn on and light of the completed

step will turn off.

To change the auxiliary function, speed and

temperature settings while a program is running, you

need to switch the machine to Pause mode. Press

Start/Pause/Cancelbuttontoswitchthemachine

intoPausemode.Inthiscase,Start/Pause/Cancel

light flashes.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactiveorthe

automaticunbalancedloaddetectionsystem

mightbeactivatedduetotheunbalanced

distributionofthelaundryinthemachine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

whenthewaterlevelisunsuitable.

When machine is switched to Pause mode, it checks

thelevelofthewaterinside.Ifthelevelissuitable,

LoadingDoorlightilluminatessteadilywithin1-2

minutesandtheloadingdoorcanbeopened.

IftheLoadingDoorlightisnoton,LoadingDoor

cannotbeopened.Ifyouareobligedtoopenthe

LoadingDoorwhiletheLoadingDoorlightisoff,you

must cancel the current programme; see "Canceling

the programme".

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WNF 6100 WEN in the language / languages: English, Danish as an attachment in your email.

The manual is 3,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg WNF 6100 WEN Manual

Product: