640549
37
Zoom out
Zoom in
Previous page
1/40
Next page
Clanking noise in the
drum.
Metal objects such as coins, pins
may be in the drum.
Stop the program cycle (See
«CancellingaProgram»),checkthe
drum for any foreign objects.
Water fill temperature is
incorrect.
Water inlet hoses or valves may
be clogged.
Disconnect inlet hoses from the
valves. Clean inlet strainers and valve
filters of any debris.
There may be a long distance
between the water heater and
washer.
Run the hot water faucets in the
bathroom or kitchen (whichever is
close to the location of your washer)
for a short time to purge the hot
water line.
There may be a problem with
water heater.
Be sure that your water heater is
delivering hot water min 120F (49C)
at the faucet.
Detergent residue left on
the laundry.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Wrong program cycle and
temperature might have been
selected.
Select the proper program cycle
and temperature for the laundry to
bewashed(See«LaundryTips»&
«ProgramCycleSelection»).
Using insufficient amount of
detergent.
Use the recommended amount of
HE detergent appropriate for water
hardness and soil level of laundry.
Using powder or granular
detergents in cold water washing
may leave residue on wash load.
Try to use a liquid detergent when
washing in cold water.
Using wrong type of detergent.
Use liquid detergent for cold wash
cycle for good wash results. Use
proper detergents recommended for
wools, handwashable and delicate
items.
Clothes get tangled up
too much in the drum
when washing.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Washing many items of the same
type or size of clothes together.
Load the wash drum with items of
different sizes.
Load is wrinkled.
Delay in unloading the washer.
Unload the washer as soon as the
wash cycle ends.
Wrong program cycle might have
been selected.
Select the proper program cycle
for the laundry to be washed (See
«LaundryTips»&«ProgramCycle
Selection»).
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg WM 67120 NBL00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg WM 67120 NBL00 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info