307662
45
Zoom out
Zoom in
Previous page
1/56
Next page
43 G
Quick instructions for daily use
Preparation
1. Open water tap fully. Check if hoses
are firmly attached.
2. Place laundry in the drum.
3. Fill in detergent and fabric condition-
er.
Starting
1. Press the >On/Off< button.
2. Set the programme selector.
3. If desired:
activate any additional function(s),
set the spin speed,
set the time delay.
4. Close the loading door.
5. Press the >Start/Pause< button.
The display shows the time remaining
for the programme to complete.
6. Check if the >Door< indicator lamp
has gone off (if not, see "Trouble-
shooting").
Aborting a programme
Press and hold the >Start/Pause< for
approx. 3 seconds.
The machine may pump out any wa-
ter still in the drum or goes through a
rinse cycle to cool off the laundry.
Adding more laundry
3
This is possible only:
during a time delay,
at the beginning of a washing cycle
(the appliance allows adding laun-
dry at a later stage only when the
water level is low or the temperature
is low).
1. Press the >Start/Pause< button.
2. Open the loading door and put in
more laundry.
3. Close the loading door.
4. Press the >Start/Pause< button.
Programme is in rinse and hold
3
You can see this from the blinking of
the >Rinse hold< indicator lamp and
the >Start/Pause< button.
If you now want to spin:
1. Set spin speed.
2. Press the >Start/Pause< button.
The programme continues, pumps out
the water and spins.
If you want to pump out the water:
1. Set spin speed selector to >No spin<.
2. Press the >Start/Pause< button.
The programme continues and only
pumps out the water.
Re-spinning the laundry
3
The automatic spin-correction-system
can prevent spinning in case the drum
is out-of-balance.
If you wish to spin again:
1. Rearrange the laundry evenly in the
drum.
2. Set programme selector to >Spin<.
3. Set spin speed.
4. Press the >Start/Pause< button.
After the programme cycle is
completed
3
When the display shows the original
programme length again, the pro-
gramme is over.
1. If the >Door< indicator lamp is on,
open the loading door and remove
your laundry.
2. Press>On/Off< button.
3. Turn the water tap off.
4. Wipe out the fold in the rubber seal on
the door and check for foreign ob-
jects.
5. Leave door and detergent dispensing
drawer open to dry.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg waf 1340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg waf 1340 in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg waf 1340

Blomberg waf 1340 User Manual - German, Dutch - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info