Manual Blomberg TKF 9431 A (page 19 of 48) (English, German)

582142

Zoom out

Zoom in

1/48

Sensor

There are humidity sensors in your dryer that

detect whether the laundry is dry or not.

To clean the sensor:

1. Open the loading door of the dryer.

2. Allow the machine to cool down if drying

has been carried out.

3. Wipe the metal sensors with a soft cloth,

dampened with vinegar and dry them.

C Clean metal sensors 4 times a year.

A Never use solvents, cleaning agents

or similar substances when cleaning

since these materials can cause fire and

explosion!

5 Maintenance and cleaning

Filter Cartridge / Door Inner

Surface

Lint and fibres released from the laundry to the

air during the drying cycle are collected in the

“Filter Cartridge”.

C Such fibre and lint are generally formed

during wearing and washing.

C Always clean the filter and the inner surfaces

of the cover after each drying process.

C You can clean the filter and filter area by

vacuum cleaner.

To clean the filter:

1. Open the loading door.

2. Remove the cover filter by pulling it up and

open the filter.

3. Clean lint, fibre, and cotton raveling by hand

or with a soft piece of cloth.

4. Close the filter and place it back into its

seat.

C Clogging may arise on the filter surface after

using your machine for some time; if this

occurs, wash the filter with water and dry it

before using again.

C Clean the entire inner surface of the cover

and door gasket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 9431 A in the language / languages: English, German as an attachment in your email.

The manual is 5,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg TKF 9431 A Manual

Product: