582153
20
Zoom out
Zoom in
Previous page
1/48
Next page
20
EN
5 Maintenance and cleaning
Service life of the product extends and frequently faced
problems decrease if cleaned at regular intervals.
B
This product must be unplugged during
maintenance and cleaning works (control panel,
body, etc.).
Lint Filter / Loading Door Inner Surface
Lint and fibres released from the laundry to the air
during the drying cycle are collected in the Lint Filter.
C
*Such fibre and lint are generally formed during
wearing and washing.
A
Always clean the lint filter and the inner surfaces of
the loading door after each drying process.
C
You can clean the lint filter housing with a vacuum
cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and open the
lint filter.
3. Clean lint, fibre, and cotton raveling by hand or
with a soft piece of cloth.
4. Close the lint filter and place it back into its
housing.
C
A layer can build up on the lint filter pores that
can cause clogging of the lint filter after using the
machine for a while. Wash the lint filter with warm
water to remove the layer that builds up on the lint
filter surface. Dry the lint filter completely before
reinstalling it.
C
Clean the entire inner surface of the loading door
and loading door gasket.
Cleaning the sensors
There are dampness sensors in the machine that detect
whether the laundry is dry or not.
To clean the sensors:
1. Open the loading door of the machine.
2. Allow the machine to cool down if it is still hot due
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8451 SGC 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8451 SGC 30 in the language / languages: English, Finnish as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info