Manual Blomberg TKF 8451 A 50 (page 25 of 56) (English, Finnish)

582143

Zoom out

Zoom in

1/56

There are dampness sensors in the

machine that detect whether the laundry

is dry or not.

To clean the sensors:

1. Open the loading door of the

machine.

2. Allow the machine to cool down if it is

still hot due to the drying process.

3. Wipe the metal surfaces of the sensor

with a soft cloth, dampened with

vinegar and dry them.

Clean metal surfaces of the sensors 4

times a year.

Do not use metal tools when cleaning

metal surfaces of the sensors.

Never use solvents, cleaning agents

or similar substances for cleaning due

to the risk of fire and explosion!

Draining the water tank

Dampness of the laundry is removed and

condensed during drying process and the

water that arise accumulates in the water

tank. Drain the water tank after each

drying cycle.

Condensed water is not potable!

Never remove the water tank when

the programme is running!

If you forget to drain the water tank, the

machine will stop during the subsequent

drying cycles when the water tank is full

and the Water Tank warning symbol will

flash. If this is the case, drain the water

tank and press Start / Pause / Cancel

button to resume the drying cycle.

To drain the water tank:

1. Pull the drawer and remove the water

tank carefully.

2. Drain the water in the tank.

3. If there is lint accumulation in the

funnel of the water tank, clean it

under running water.

4. Place the water tank into its seat.

Cleaning the filter drawer

Lint and fibre that could not be captured

by the lint filter are blocked in the filter

drawer behind the kick plate. Filter

Drawer Cleaning warning light will light up

maximum at every 5 drying cycles as a

reminder.

There is a two-level filter in the filter

drawer. The first level is the filter drawer

sponge and the second level is the filter

cloth.

To clean the filter drawer:

1. Press the kick plate button to open

the kick plate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8451 A 50 in the language / languages: English, Finnish as an attachment in your email.

The manual is 6,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg TKF 8451 A 50 Manual

Product: