303781
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
EN
EN 2
Programs Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate
amount of
remaining
humidity
Drying time
(minutes)
Cottons / Coloreds
A
Extra dry 8 1000 % 60 137
A
Ready to Wear 8 1000 % 60 130
A
Ready to Iron 8 1000 % 60 105
Mini 35'
2 1200 %50 35
Shirt
1.5 1000 %50 40
Jeans
4 1200 %50 80
Shirt 15'
0.5 1200 %50 15
Mixed
4 800 %60 83
Sport
4 800 %60 92
Viscose
1.5 600 %100 100
Lingerie
1 600 %40 50
Woolen preparation
1.5 600 %50 6
Synthetics
B
Ready to Wear 4 900 % 40 53
Energy consumption values
Programs Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate
amount of
remaining
humidity
Energy
consumption
value kWh
Cottons linen Ready to wear*
8 1000 % 60 4.49
Cottons Ready to iron
8 1000 % 60 3.80
Synthetics&Mixed fabrics Ready
to wear
4 900 % 40 1.80
Auxiliary function
Audio Warning
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear this buzzing or want
to change the volume level, you need to
press the “Volume level” button. No audio
warning will be given when “x” appears on
the screen.
C You can select this function either
before or after the programme starts.
Drying degree
Used to adjust the required dryness level.
More drying is performed compared to
the default settings when “+” sign appears
and less drying is performed when “-” sign
appears. Programme duration can change
depending on the selection.
A This function must be selected before
the programme starts.
Anti-creasing
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the programme is over. This
programme rotates the laundry in
600-second intervals to prevent creasing.
Press “Anti-creasing” button to activate.
Anti-creasing is activated but the
programme is running in the first
exemplary figure. Drying is over and the
first step of anti-creasing has started in the
second figure.
Changing the contrast
Contrast can be adjusted in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
change the contrast setting of the display
when the dryer is installed over a washing
machine.press and
Press and hold the Spin Speed/Time
button for 3 seconds.
When the contrast is changed at the end
of 3 seconds, all symbols on the display
will become visible for 3 seconds in order
to indicate that the process is complete.
Perform the same procedure to revert back to
the previous contrast setting.
Warning indicators
C Warning indicators may differ according
to the model of your machine.
Filter cleaning
A warning symbol will appear to remind
filter cleaning after the programme finishes.
C f the filter cleaning symbol flashes
continuously, please refer to
“Suggested solutions for problems”.
Water tank
A warning symbol will turn on at the end
of the programme or when the tank is full
with water. The machine stops operating
if the warning symbol turns on when a
programme is running. To restart the
machine, please drain the water in the
water tank. Press “Start/Pause/Cancel”
button to start the programme after you
have emptied the water tank. The warning
symbol turns off and the programme
resumes operating.
Cleaning the condenser
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg tkf 8439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg tkf 8439 in the language / languages: English, German as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg tkf 8439

Blomberg tkf 8439 User Manual - Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info