581566
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
EN
“Ventilation”:
- Illuminates when the programme ends.
C Anti-creasing icon will light up at the
end of the programme if anti-creasing
function is active.
Changing the programme after it
has started
You can use this feature to dry your
laundry in a different programme after your
machine has started to run.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme.
Select the “Extra Dry” programme by
rotating the programme selection knob.
Press “Start/Pause/Cancel” button to start
the programme.
C The programme which is selected first
will continue even if the programme
selection button is turned to another
programme position while the machine
is operating. You must cancel the
ongoing programme in order to change
the drying programme. (See. Finishing
by canceling the programme)
Speed and function indicators will turn
off when you change the position of the
programme selection knob while the
machine is running (audio warning, drying
level and anti-crease symbols). However,
the current programme continues. If the
programme selection knob is turned back
to the current programme, symbols of
those indicators will appear again.
Adding/removing laundry in standby mode
In order to add or remove laundry after the
programme starts:
1. Press the “Start/Pause/Cancel” button
to switch the dryer to “Pause” mode.
Drying process will stop.
2. Open the door at “Pause” position and
close it again after adding or taking out
laundry.
3. Press “Start/Pause/Cancel” button to
start the programme.
C Any laundry added after the drying
process has started may cause the
dried clothes in the machine intermingle
with wet clothes and the result will be
wet laundry after the drying process is
over.
C Laundry may be added or taken out
as much as desired during a drying
process, but this process will extend
the programme duration and increase
energy consumption since the drying
will be interrupted continuously.
Therefore, it is recommended to add
laundry before the drying programme
has started.
Child-proof lock
There is a child-proof lock to prevent
any programme interruption due to the
pressing of button while the programme is
running. The loading door and all buttons
except the “On/Off” button on the control
panel are deactivated when the child-proof
lock is active.
In order to activate the childproof lock,
press on the “audio warning” and “anti-
creasing” buttons simultaneously for 3
seconds.
To start a new programme after the
programme is over or to interrupt the
programme, the child-proof lock should be
deactivated. Press the same buttons for
3 sec. again to deactivate the child-proof
lock.
C Lock symbol will appear on the screen
when the child-proof lock is activated.
Finishing by canceling the
programme
The programme which is selected first will
keep on running even if the position of the
programme selection knob is changed
when the dryer is operating. A new
programme can be selected and started
after “Programme cancel” is activated in
order to change the drying programme.
To cancel any selected programme:
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8439 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8439 A in the language / languages: English, German as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg TKF 8439 A

Blomberg TKF 8439 A User Manual - Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info