582140

Blomberg TKF 8431 A Manual

16
Zoom out
Zoom in
Previous page
1/68
Next page
16
EN
Cleaning the condenser
Warning symbol turns on with certain intervals
to remind that the condenser needs cleaning.
Door open
Dryer door open symbol lights up.
Time delay
With the “Time delay” function you can delay
the programme start up to 24 hours.
1. Open the loading door and put the laundry
in.
2. Set the drying programme and spin speed,
and if required, select the auxiliary functions.
3. Press “Time delaying” buttons “+” and “-” to
set the desired time delay. The time delay
symbol will flash.
4. Press “Start/Pause/Cancel” button. Then the
time delay starts to count down. The Time
delay symbol lights up. Start symbol lights
up.
The “:” in the middle of the displayed time delay
will start flashing.
More laundry may be loaded or taken out
during the time delay period. At the end of the
time delay countdown process, time delay
symbol fades, drying process starts and the
programme duration is displayed. The time on
the display is the total of normal drying time
and delay time.
Time delay is started by pressing the start/
pause/cancel button in the exemplary figure.
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme. Time
delay function must be set again for the
required time.
2. Press Time delay buttons “+” or “-” to set
the desired time delay.
3. Press “Start/Pause/Cancel” button. The
Time delay symbol lights up. Pause symbol
fades. Start symbol lights up.
4. The “:” in the middle of the displayed time
delay will start flashing.
Canceling the time delay
If you want to cancel the time delay countdown
and start the programme immediately:
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme.
2. Then, press “Start/Pause/Cancel” button to
start the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to start
the programme.
2. “Start/Pause” symbol will light up to indicate
that the programme has started and “:”
symbol between the remaining time will
continue flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Ventilation
Anti-
creasing
The progress of a running programme is shown
through a number of symbols on the screen.
At the beginning of each programme step, the
relevant symbol in the series of symbols will
light up and thus, all symbols will remain lit up
at the end of the programme. The symbol that
is lit up at the far right of the series of symbols
indicates the step that is being carried out.
“Drying”:
- Lights up in all programmes apart from drying
and ventilation.
“Iron Dry”:
- Starts to illuminate when the drying degree
reaches “iron dry” step and remains illuminated
until the next step.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8431 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8431 A in the language / languages: English, Danish as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info