581564
30
Zoom out
Zoom in
Previous page
1/36
Next page
30
EN
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when the
programme comes to an end. If you do not want
to hear the audio warning, press “Cancel Audio
Warning” button. The relevant light will turn on
when this button is pressed and an audio warning
will not be given when the programme comes to
an end.
C You can select this function either before or
after the programme starts.
Warning indicators
C Warning indicators may differ according to the
model of your dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C If the filter cleaning warning light lights up
continuously, please refer to, “Suggested
solutions for problems”.
Water tank
Warning light starts flashing when the tank is
filled with water. The dryer stops operating if
the warning light turns on when a programme
is running. Drain the water in the water tank to
restart the dryer. Press “Start/Pause/Cancel”
button to start the programme after you have
emptied the water tank. The warning light turns
off and the programme resumes operating.
Time delay
If you wish to dry your clothes at a later time,
thanks to the time delay function, you can delay the
program start up to 3 hours, 6 hours or 9 hours.
1. Open the loading door and put the laundry in.
C Make sure that all air outlets are open, door
filter is cleaned and the water tank is empty.
2. Set the drying program and, if required, the
auxiliary functions.
3. When the time programming button is
pressed once, a 3 hour delay is selected and
the relevant led lights. When the same button
is pressed again, 6 hours; and if pressed once
more, 9 hours delay will be selected. If the
time programming button is pressed one more
time, time delaying function will be cancelled.
Set the time delay as you require.
4. Delayed operation of the selected program is
started by pressing the “Start/Pause/Cancel”
button after selecting the time delay.
C Additional laundry may be loaded / taken out
during the time delay period.
C During the time delay period, laundry is
rotated for 4 seconds in every 10 minutes to
prevent creasing.
Canceling the time delay
If you want to cancel the time delay countdown
and start the program:
1. Press “Start/Pause/Cancel” button for about 3
seconds.
2. Press “Start/Pause/Cancel” button to start the
program right away.
Starting the programme
1. Press “Start/Pause/Cancel” button to start the
programme.
2. Light of the “Start/Pause/Cancel” button will
turn on to indicate that the programme has
started.
Progress of program
Progress of a running program is shown through
the program follow-up indicator.
At the beginning of every program step, the
relevant indicator LED will light up and light of the
completed step will turn off.
“Drying”:
- Drying level will be illuminated during the whole
drying process until the drying degree reaches “iron
dry”.
“Iron Dry”:
- Starts to illuminate when the drying degree
reaches “iron dry” step and remains illuminated until
the next step.
“Ready to wear”:
Starts to illuminate when the drying degree reaches
“Ready to wear” step and remains illuminated until
the next step.
“Final / Anti-creasing”:
- Illuminates when the program comes to an end
and anti-creasing function is activated.
C If more than one LED light up or flash
concurrently, it means there is malfunctioning
or a failure (please see, Solution suggestions
for problems).
Changing the programme after it has
started
You can use this feature to dry your clothes under
higher or lower temperatures after your dryer has
started.
For example;
1. Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel” the
programme in order to select “Extra Dry”
programme instead of “Iron Dry” programme.
2. Select the “Extra Dry” programme by rotating
the programme selection button.
3. Press “Start/Pause/Cancel” button to start the
programme.
C Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme or turn the
programme selection knob in any direction
to end the programme while the machine
is running. Water tank and filter cleaning
warning lights turn on to warn the user when
the programme is cancelled by pressing the
“Start/Pause/Cancel” button for 3 seconds.
However, the warning lights do not turn
on when the programme is cancelled by
turning the programme selection knob. Only
the drying light turns on and the machine
remains in hold until a new programme is
selected and the “Start/Pause/Cancel” button
is pressed. Child-proof lock of the machine
should not be active in order to perform
these two operations. If the child-proof lock is
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8239 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8239 in the language / languages: English, German as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info