Manual Blomberg TKF 7459 A (page 15 of 42) (English, German)

581561

Zoom out

Zoom in

1/42

15 - EN

Time delay

With the “Time delay” function you can delay

the programme start up to 24 hours.

1. Open the loading door and put the laundry

in.

2. Set the drying programme and spin

speed, and if required, select the auxiliary

functions.

3. Press “Time delaying” buttons “+” and “-” to

set the desired time delay. The time delay

symbol will flash.

4. Press “Start/Pause/Cancel” button. Then

the time delay starts to count down. The

Time delay symbol lights up. Start symbol

lights up.

The “:” in the middle of the displayed time delay

will start flashing.

More laundry may be loaded or taken out

during the time delay period. At the end of the

time delay countdown process, time delay

symbol fades, drying process starts and the

programme duration is displayed. The time on

the display is the total of normal drying time and

delay time.

Time delay is started by pressing the start/

pause/cancel button in the exemplary

figure.

Changing the delay time

If you want to change the time during the

countdown:

1. Press “Start/Pause/Cancel” button for 3

seconds to cancel the programme. Time

delay function must be set again for the

required time.

2. Press Time delay buttons “+” or “-” to set

the desired time delay.

3. Press “Start/Pause/Cancel” button. The

Time delay symbol lights up. Pause symbol

fades. Start symbol lights up.

4. The “:” in the middle of the displayed time

delay will start flashing.

Canceling the time delay

If you want to cancel the time delay countdown

and start the programme immediately:

1. Press “Start/Pause/Cancel” button for 3

seconds to cancel the programme.

2. Then, press “Start/Pause/Cancel” button to

start the desired programme.

Starting the programme

1. Press “Start/Pause/Cancel” button to start

the programme.

2. “Start/Pause” symbol will light up to

indicate that the programme has started

and “:” symbol between the remaining time

will continue flashing.

Progress of programme

Drying

Iron

Wardrobe

(Extra)

Ventilation

Anti-

creasing

The progress of a running programme is shown

through a number of symbols on the screen.

At the beginning of each programme

step, the relevant symbol in the series

of symbols will light up and thus, all

symbols will remain lit up at the end of the

programme. The symbol that is lit up at the

far right of the series of symbols indicates

the step that is being carried out.

“Drying”:

- Lights up in all programmes apart from drying

and ventilation.

“Iron Dry”:

- Starts to illuminate when the drying degree

reaches “iron dry” step and remains illuminated

until the next step.

“Wardrobe Dry”:

Starts to illuminate when the drying degree

reaches “wardrobe dry” step, and remains

illuminated until the next step.

“Wardrobe Dry Extra”:

Starts to illuminate when the drying degree

reach to “wardrobe dry extra” step.

“Ventilation”:

- Illuminates when the programme ends.

C Anti-creasing icon will light up at the end of

the programme if anti-creasing function is

active.

Changing the programme after it has

started

You can use this feature to dry your laundry in

a different programme after your machine has

started to run.

For example;

Press and hold the “Start/Pause/Cancel” button

for about 3 seconds to “Cancel” the programme

in order to select “Extra Dry” programme

instead of “Iron Dry” programme.

Select the “Extra Dry” programme by rotating

the programme selection knob.

Press “Start/Pause/Cancel” button to start the

programme.

C The programme which is selected first

will continue even if the programme

selection button is turned to another

programme position while the machine is

operating. You must cancel the ongoing

programme in order to change the drying

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 7459 A in the language / languages: English, German as an attachment in your email.

The manual is 3,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg TKF 7459 A Manual

Product: