581555
15
Zoom out
Zoom in
Previous page
1/44
Next page
15 - EN
Time delay
With the “Time delay” function you can delay
the programme start up to 24 hours.
1. Open the loading door and put the laundry
in.
2. Set the drying programme and spin
speed, and if required, select the auxiliary
functions.
3. Press “Time delaying” buttons “+” and “-” to
set the desired time delay. The time delay
symbol will flash.
4. Press “Start/Pause/Cancel” button. Then
the time delay starts to count down. The
Time delay symbol lights up. Start symbol
lights up.
The “:” in the middle of the displayed time delay
will start flashing.
More laundry may be loaded or taken out
during the time delay period. At the end of the
time delay countdown process, time delay
symbol fades, drying process starts and the
programme duration is displayed. The time on
the display is the total of normal drying time and
delay time.
Time delay is started by pressing the start/
pause/cancel button in the exemplary
figure.
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme. Time
delay function must be set again for the
required time.
2. Press Time delay buttons “+” or “-” to set
the desired time delay.
3. Press “Start/Pause/Cancel” button. The
Time delay symbol lights up. Pause symbol
fades. Start symbol lights up.
4. The “:” in the middle of the displayed time
delay will start flashing.
Canceling the time delay
If you want to cancel the time delay countdown
and start the programme immediately:
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme.
2. Then, press “Start/Pause/Cancel” button to
start the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to start
the programme.
2. “Start/Pause” symbol will light up to
indicate that the programme has started
and “:” symbol between the remaining time
will continue flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Ventilation
Anti-
creasing
The progress of a running programme is shown
through a number of symbols on the screen.
At the beginning of each programme
step, the relevant symbol in the series
of symbols will light up and thus, all
symbols will remain lit up at the end of the
programme. The symbol that is lit up at the
far right of the series of symbols indicates
the step that is being carried out.
“Drying”:
- Lights up in all programmes apart from drying
and ventilation.
“Iron Dry”:
- Starts to illuminate when the drying degree
reaches “iron dry” step and remains illuminated
until the next step.
“Wardrobe Dry”:
Starts to illuminate when the drying degree
reaches “wardrobe dry” step, and remains
illuminated until the next step.
“Wardrobe Dry Extra”:
Starts to illuminate when the drying degree
reach to “wardrobe dry extra” step.
“Ventilation”:
- Illuminates when the programme ends.
C Anti-creasing icon will light up at the end of
the programme if anti-creasing function is
active.
Changing the programme after it has
started
You can use this feature to dry your laundry in
a different programme after your machine has
started to run.
For example;
Press and hold the “Start/Pause/Cancel” button
for about 3 seconds to “Cancel” the programme
in order to select “Extra Dry” programme
instead of “Iron Dry” programme.
Select the “Extra Dry” programme by rotating
the programme selection knob.
Press “Start/Pause/Cancel” button to start the
programme.
C The programme which is selected first
will continue even if the programme
selection button is turned to another
programme position while the machine is
operating. You must cancel the ongoing
programme in order to change the drying
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 7449 Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 7449 Z in the language / languages: English, German as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info