581546

Blomberg TKF 7330 Manual

41
Zoom out
Zoom in
Previous page
1/44
Next page
18 - EN
Condenser sponge (for
products equipped with a heat
pump)
It is very important that the lint and fibres
are caught completely by the filters of
your machine which is equipped with
a condenser with heat pump. Failure in
functioning of the filters may cause a drop
in the performance or breakdown of your
machine. Therefore, in addition to the
“Cover Filter” and “Filter Drawer” filtering
phases in your machine, there is also a
“Condenser Sponge” piece for protection
purpose. If the “Cover Filter” and “Filter
Drawer” are functioning appropriately, ,
“the “Condenser Sponge” piece should
be checked every 3 months. Any layer of
accumulated lint on the sponge must be
removed.
C If the lint and fibre collected on the
sponge is sparse and small, you do
not have to clean the sponge.
To clean the condenser sponge;
1 Take out the condenser sponge from
its place.
C Youcanreachthecondenserfilter
after taking out the filter drawer.
C A wire grid can be seen after taking
out the condenser sponge.
2 Clean the sponge and place it properly
back into its place. Put the sponge in
its housing between the wire grid and
plastic frame.
Important:
• Whenplacingthecondensersponge,
make sure that some part or whole of
lint particles among the pores is not
important.
C If the lint and fibres collected in the
drawer is sparse and small, you do
not have to clean the sponge.
6 Place the sponge back into its place.
7 Close the filter unit as to lock the red
button.
8. Place the filter drawer back into its
place and push forward until a click
sound is heard.
Important:
• Dryingwithoutthefilterspongewill
damage your machine!
• Adirtyheatpumpwillcauselonger
drying periods and higher energy
consumption.
• Placethespongeasshownbelow,
without forcing it. Pay attention to seat
the left side of the sponge into the
appropriate housing in the filter drawer
as marked in the picture.
• Donotsqueezethespongetomake
it go into the inner frame as shown in
the picture below.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 7330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 7330 in the language / languages: English, German as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info