581547

Blomberg TKF 7330 A Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
14 - EN
Time delay
With the “Time delay” function you can
delay the program start up to 19 hours.
1. Opentheloadingdoorandputthe
laundry in.
2. Select the drying program and select
the auxiliary functions if required.
3. Press the “Time delay” buttons to
adjust the desired time.
4. Press “Start/Pause/Cancel” button.
The time delay function will start to
countdown.
C Additional laundry may be loaded
during the time delay period.
5. At the end of countdown process,
“:” will light up continuously and the
relevant program follow-up light will
light up according to the selected
program.
C During drying process, the display
shows the estimated time remaining for
the program to finish. The estimated
time displayed on the screen at the
beginning of the drying process
has been calculated on the basis
of an 800 rpm spin speed rate to
dry a maximum load capacity in the
washing machine.
C If the loaded laundry amount is less
than the calculated laundry amount or
if drying has been performed at higher
spin speed, the remaining time may
be less than the time that appears on
the display.
C Incase the laundry is spun at a lower
spin rate than the calculated one and
if “Filter Cleaning” or “Condenser
Cleaning” processes are not carried
out, the remaining time may be longer
than the time shown on the display.
C Dryness level of the laundry is
detected by sensors during a drying
cycle and the remaining time is
Auxiliary function
Cancel Audio Warning
Yourmachinewillsendoutanaudio
warning when the program comes to
an end. If you do not want to hear this
buzzing, you need to press the “Cancel
Audio Warning” button. The relevant LED
will light up when this button is pressed
and an audio warning will not be given
when the program comes to an end.
C Youcanselectthisfunctioneither
before or after the program starts.
Warning indicators
C Warning indicators may differ according
to the model of your machine.
Timer programming
A warning LED will light up when timer is
programmed.
Child-proof lock
A warning LED will light up as long as the
child-proof lock remains activated.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the program finishes.
C If the filter cleaning warning lights up
continuously, please refer to, “Solution
suggestions for problems”.
Tank full
A warning LED will light up at the end
of the program or when the tank is full
with water. The machine stops operating
when this warning LED lights up during a
program running. To enable the machine
restart, drain the water in the water tank.
Press "Start/Pause/Cancel" button to start
the program after you have emptied the
water tank. The warning LED goes off and
the program resumes operating.
Cleaning the condenser.
It will light up periodically after maximum 5
drying cycles for the purpose of reminding.
In this case and after drying, clean as
explained in the section “Maintenance and
Cleaning”.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 7330 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 7330 A in the language / languages: English, German as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info