581545
37
Zoom out
Zoom in
Previous page
1/44
Next page
14 - EN
Time delay
If you wish to dry your clothes at a later
time, thanks to the time delay function,
you can delay the program start up to 3
hours, 6 hours or 9 hours.
1. Opentheloadingdoorandputthe
laundry in.
C Make sure that all air outlets are open,
door filter is cleaned and the water
tank is empty.
2. Set the drying program, temperature,
spin speed and, if required, the
auxiliary functions.
3. When the time programming button
is pressed once, a 3 hour delay is
selected and the relevant led lights.
When the same button is pressed
again,6hours;andifpressedonce
more, 9 hours delay will be selected.
If the time programming button is
pressed one more time, time delaying
function will be cancelled. Set the time
delay as you require.
4. Delayed operation of the selected
program is started by pressing the
"Start/Pause/Cancel" button after
selecting the time delay.
C Additional laundry may be loaded /
taken out during the time delay period.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Press “Start/Pause/Cancel” button
for about 4 seconds. The “:” in the
middle of the screen will stop flashing.
“Start/Pause/Cancel” light will go off
and the remaining time on the screen
disappears.
2. Press "Start/Pause/Cancel" button to
start the program right away.
Starting the Program
1. Press "Start/Pause/Cancel" button to
start the program.
2. “Start/Pause/Cancel” button will light
up to indicate that the program has
started.
Auxiliary function
Cancel Audio Warning
Yourmachinewillsendoutanaudio
warning when the program comes to an
end. If you do not want to hear this
buzzing, you need to press the “Cancel
Audio Warning” button. The relevant LED
will light up when this button is pressed
and an audio warning will not be given
when the program comes to an end.
C Youcanselectthisfunctioneither
before or after the program starts.
Warning indicators
C
Warning indicators may differ
according to the model of your
machine.
Child-proof lock
A warning LED will light up as long as the
child-proof lock remains activated.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the program finishes.
C If the filter cleaning warning lights up
continuously, please refer to, “Solution
suggestions for problems”.
Tank full
A warning LED will light up at the end of
the program or when the tank is full with
water. The machine stops operating
when this warning LED lights up during a
program running. To restart the machine,
please drain the water in the water tank.
Press "Start/Pause/Cancel" button to start
the program after you have emptied the
water tank. The warning LED goes off and
the program resumes operating.
Cleaning the condenser.
It will light up periodically after maximum 5
drying cycles for the purpose of reminding.
In this case and after drying, clean as
explained in the section “Maintenance and
Cleaning”.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 7230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 7230 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg TKF 7230

Blomberg TKF 7230 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info