69359
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
• Press the “+”-button to adjust the time-
delay “1”, “2”, … until “19”, the “-“-button to
reset from “19” to “1”.
2. Press the button “Start/Pause/Cancel”,
the appropriate control indicator flashes,
the time-delay starts.
3. During the time-delay period more
laundry can be added. After adding, the
“Start/Pause/Cancel”-button must be
pressed again.
Aborting a time-delay
An active delay-time can be stopped at any
time:
1. Press the button “Start/Pause/Cancel”
for approximately 3-4 seconds – the preset
time-delay will be switched off. The control
indicator no longer flashes and the time
indicated on the display is annulled.
2. If you want to start the program immedi-
ately, simply press “Start”.
Changing time-delay
You can change the time-delay, if needed.
1. Press the “Start/Pause/Cancel”-Button.
The semicolon in the middle of the display
stops flashing.
2. Press the “+”-button to adjust the time
delay “1”, “2”, … until “19”, the “-“-button to
reset from “19” to “1”.
3. Press the button “Start/Pause/Cancel”,
the appropriate control indicator flashes,
the time delay starts.
Program progress indicator
During the program, a program progress
indicator will be on, indicating the current
program step.
“Drying”:
- is on during the entire heating time until
the drying level “Ironing dry” has been
reached.
“Ironing dry”:
- is on until the laundry has reached the
drying level “Linen cupboard dry”.
“Linen cupboard dry”:
- is on when the laundry has reached the
drying level “Linen cupboard dry”.
“Cool down”:
- during the ca. 4-minute long cooling-down
phase.
“End / Anti-crease”:
- during the anti-crease phase, until the
program has ended.
Important Advice
When several indicators are illuminated
simultaneously, there is a malfunction or
a problem. See chapter “Do it yourself,
when…”
Program Progress Indicators
Are illuminated during the following func-
tions and instructions:
• Time-delay when time-delay has been
adjusted (see “Time-delay).
• Child lock: if the child lock is active (see
also “child safety”).
• Clean fluff filter: at the end of a program
when the filter has to be cleaned. See also
Chapter Fluff filter.
• Empty the tank: at the end of the program
when the water tank has to be emptied or
when the drain hose is connected.
• Clean the condenser: in regular intervals,
after ca. 5 program cycles, when the filter
unit is to be cleaned and replaced. See
also Chapter Fluff filter/sponge filter unit.
After drying
The fluff filter
Fluff balls are rubbed off by wearing the
clothes– not by drying. When drying, these
fluff balls are trapped in the fluff filter.
Important Advice
The Fluff filter must be cleaned after every
drying operation!
Procedure:
1. Open the door.
2. Pull the fluff filter out of the door.
3. Carefully remove the fluff balls by hand
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 1350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 1350 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg TKF 1350

Blomberg TKF 1350 Quick start guide - German - 1 pages

Blomberg TKF 1350 User Manual - German - 18 pages

Blomberg TKF 1350 User Manual - Dutch, French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info