Manual Blomberg som 1650 (page 7 of 81) (English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish)

338943

Zoom out

Zoom in

1/81

Instruction ManualGB

Electrical requirements

Before inserting the plug into the wall socket

make sure that the voltage and the frequency

shown in the rating plate inside the appliance

corresponds to your electricity supply.

We recommend that this appliance be

connected to the mains supply via a suitably

switched and fused socket in a readily accessible

position.

Warning! This appliance must be

earthed.

Repairs to electrical equipment should only be

performed by a qualified technician. Incorrect

repairs carried out by an unqualified person

are carry risks that may have critical

consequences for the user of the appliance.

• Do not dispose of the appliance on a fire. At

, the care and protection of our

environment is an ongoing commitment. This

appliance which is among the latest range

introduced is particularly environment friendly.

Your appliance contains non CFC/HFC natural

substances in the cooling system (called R600a)

and the insulation (called cyclopentane) which

are potentially flammable if exposed to fire.

Therefore, take care not to damage, the cooling

circuit/ pipes of the appliance in transportation

and in use. In case of a damage do not expose

the appliance to fire, potential ignition source

and immediately ventilate the room where the

appliance is situated.

• We suggest you contact your local authority

for disposal information and facilities available.

WARNING- Keep ventilation openings, in the

appliance enclosure or in the built-in structure,

clear of obstruction.

WARNING- Do not use mechanical devices

or other means to accelerate the defrosting

process, other than those recommended by the

manufacturer.

WARNING- Do not damage the refrigerant

circuit.

WARNING- Do not use electrical appliances

inside the food storage compartments of the

appliance, unless they are of the type

recommended by the manufacturer.

Transportation

instructions

1. The appliance should be transported only

in upright position. The packing as supplied

must be intact during transportation.

2. If during the course of transport the appliance,

has been positioned horizontally, it must not

be operated for at least 4 hours, to allow the

system to settle.

3. Failure to comply with the above instructions

could result in damage to the appliance, for

which the manufacturer will not be liable for.

4. The appliance must be protected against

rain, moisture and other atmospheric influences.

Important!

• Care must be taken while cleaning/carrying

the appliance not to touch the bottom of the

condenser metal wires at the back of the

appliance, as this could cause injury to fingers

and hands.

• Do not attempt to sit or stand on top of your

appliance as it is not designed for such use.

You could injure yourself or damage the

appliance.

• Make sure that the mains cable is not caught

under the appliance during and

after moving, as this could damage the cable.

• Do not allow children to play with the

appliance or tamper with the controls.

Installation instructions

1. Do not keep your appliance in a room where

the temperature is likely to fall below 10 degrees

C (50 degrees F) at night and/or especially in

winter, as it is designed to operate in ambient

temperatures between +10 and +32 degrees

C (50 and 90 degrees F). At lower temperatures

the appliance may not operate, resulting in a

reduction in the storage life of the food.

2. Do not place the appliance near cookers

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg som 1650 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg som 1650 Manual

Product: