Manual Blomberg KSM 9660 X A (page 11 of 48) (English, German, Danish, Swedish)

581878

Zoom out

Zoom in

1/48

Check that the tube is permanently placed with

its end in the collecting tray on th

e compressor

to prevent the water spilling on the electric

installation or on the floor (Item 7).

B) Freezer compartment

Defrosting is very straightforward and without

mess, thanks to a special defrost collection

basin.

Defrost twice a year or when a frost layer of

around 7 (1/4") mm has formed. To start the

defrosting procedure, switch off the appliance

at the socket outlet and pull out the mains

plug.

All food should be wrapped in several layers

of newspaper and stored in a cool place (e.g.

fridge or larder).

Containers of warm water may be placed

carefully in the freezer to speed up the

defrosting.

Do not use pointed or sharp-edged

objects, such as knives or forks to remove

the frost.

Never use hairdryers, electrical heaters or

other such electrical appliances for defrosting.

Sponge out the defrost water collected in the

bottom of the freezer compartment. After

defrosting, dry the interior thoroughly (Item 8).

Insert the plug into the wall socket and switch

on the electricity supply.

Replacing the interior light bulb

(Item 10)

In case that the light bulb is out of function it is

easily to replace. First make sure that the

refrigerator / freezer is disconnected from the

power supply by removing the plug. Take a flat

screwdriver and keep it carefully without force

into the left gap between lamp cover and

internal cabinet. Then press the handle of the

screwdriver carefully to the left side until you

notice that the left pin of the cover is

disengaged . Repeat this procedure on the right

gap, however now press the handle of the

screwdriver carefully to the right side. If both

sides are loosened the cover can be removed

easily.

Ensure that bulb is screwed securely in the bulb

holder. Plug the appliance into the power

supply. If the light still fails, replace E14 screw-

cap type 15 Watt (Max) bulb from your local

electrical store and then fit it. Carefully dispose

of the burnt-out light bulb immediately.

If you have changed the light bulb please fix

the cover again in it’s former position. Take

care that the cover snaps-in correctly.

Cleaning and care

1. We recommend that you switch off the

appliance at the socket outlet and pull out the

mains plug before cleaning.

2. Never use any sharp instruments or

abrasive substances, soap, household

cleaner, detergent or wax polish for cleaning.

3. Use luke warm water to clean the cabinet

of the appliance and wipe it dry.

4. Use a damp cloth wrung out in a solution

of one teaspoon of bicarbonate of soda to one

pint of water to clean the interior and wipe it

dry.

5. Make sure that no water enters the

temperature control box.

6. If the appliance is not going to be used for

a long period of time, switch it off, remove all

food, clean it and leave the door ajar.

7. We recommend that you polish the metal

parts of the product (i.e. door exterior, cabinet

sides) with a silicone wax (car polish) to

protect the high quality paint finish.

8. Any dust that gathers on the condenser,

which is located at the back of the appliance,

should be removed once a year with a

vacuum cleaner.

9. Check door seals regularly to ensure they

areclean and free from food particles.

10. Never:

• Clean the a

ppliance with unsuitable material;

eg petroleum based products.

• Subject it to high temperatures in any way,

• Scour, rub etc., with abrasive material.

11. Removal of dairy cover and door tray :

• To remove the dairy cover, first lift the cover

up by about an inch and pull it off from the

side where there is an opening on the cover.

• To remove a door tray, remove all the

contents and then simply push the door tray

upwards from the base.

12. Make sure that the special plastic

container at the back of the appliance which

collects defrost water is clean at all times. If

you want to remove the tray to clean it, follow

the instructions below:

Instruction for use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg KSM 9660 X A in the language / languages: English, German, Danish, Swedish as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg KSM 9660 X A Manual

Product: