338942
15
Zoom out
Zoom in
Previous page
1/91
Next page
Instruction ManualGB
9
Repositioning the doors (Fig. 8)
1- Switch off at the socket outlet and pull out the mains plug.
2- Remove all food, loose items and fittings from the appliance and door shelves.
3- Unscrew the bolts and remove the middle hinge while holding doors. (1)
4- Remove the fresh food compartment door from the top hinge by sliding down 
and pulling front. (2)
5- Remove the freezer compartment door by pulling up. (3)
6- Remove the plastic covers on the front top trim. (4)
7- Unscrew the bolts of the top hinge and remove top hinge. (5)
8-  Reposition plugs on the opposite side. (6)
9- Remove the front bottom trim. (7)
10-Carefully lay the appliance on its back. (8)
(You may need somebody to help you.)
11-Unscrew and remove the left hand side front feet. (9)
12-Unscrew and remove the bottom hinge. (10)
13-Reposition the plastic covers on top of fresh food door to the opposite 
side
.
(11)
14-Unscrew and remove the middle hinge bushing from fresh food door. (12)
15-Screw and fix the new middle hinge bushing which is supplied in IB bag to 
the other side.(13)
16-Reposition the hinge bushing and the tap on the freezer door. (14)
17-Unscrew and reposition the bottom hinge bushing. (15)
18-Unscrew bolt of the pin on the bottom hinge. Fit the pin to the other hole on 
the hinge and tighten the bolt on the new position. (16)
19- Fit the bottom hinge and other feet, and tighten the screws. (17)
20- Remove the plastic tap to the opposite side on the front bottom trim. (18)
21- Fit the front bottom trim to the bottom hinge and other feet. (19)
22-Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the 
opposite side. (20)
23-Fit the top hinge and tighten the bolts. (21)
24-Fit the plastic cover on the front top trim. (22)
25-Locate the freezer door to the bottom hinge and attach to the cabinet. (23)
26-Locate the middle hinge on the freezer door (24) and put the fresh food
between the top and middle hinge carefully. (25)
27-Fit the middle hinge. Adjust the doors and tighten the bolts. (26)
28-Carefully stand your appliance (you may need somebody to help you) adjust 
the front feet.
29-Remove the plastic plugs on the doors. Unscrew the door handles. Reposition 
the door handles on the other side. Tighten the screws and fit the plastic 
plugs. (27)
30-Put back all, loose items and fittings.
31-Wait for at least 4 hours to allow the system to settle before switching on.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg ksm 1650 a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg ksm 1650 a in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info