Manual Blomberg IWD 1008 ET (page 13 of 601) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

581806

Zoom out

Zoom in

1/601

unscrewing its screws as shown in the

figure below. (See Figure B)

2. Loosen the three screws of the hinges

of the lower door, which you wish to

escalate, with the help of a screwdriver

as shown in the figure below. (Do not

remove completely)

(See Figure C)

• If the freezer compartment door is

lower than the fridge compartment door,

bring them to the same level by turning

the turning the elevation screw on the

freezer compartment side in the direction

of arrow using a M6 Allen wrench as

illustrated in Figure D.

(D)

• If the freezer compartment door is

higher than the fridge compartment

door, bring them to the same level

by turning the elevation screw on the

freezer compartment side in the reverse

direction of arrow using a M6 Allen

wrench as illustrated in Figure D.

After bringing the doors to the same level

by elevating the front part with the aid of

the elevation screws,ensure the doors of

the refrigerator shall close properly. If the

doors do not close properly, this might

adversely affect the efficiency of the

refrigerator.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg IWD 1008 ET in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 25,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg IWD 1008 ET Manual

Product: