581409
30
Zoom out
Zoom in
Previous page
1/45
Next page
29 EN
Programming the washing
time
Time Delay
You can delay the start of the selected
programme up to 18 hours. Time Delay
can not be set after the programme
starts.
1. Press Time Delay key to enter the
Time Delay menu.
2. Display information line will display
“0:00” and Sandglass indicator will
start flashing.
3. Press > or < Selection keys to
set the desired time delay. > key
increases the delay time by steps
of 30 minutes and < key decreases
it by steps of 30 minutes.
4. Press Start / Pause / Cancel key
to start countdown for the time
delay. Sandglass will continuously
light until the end of countdown.
Time Delay is displayed on the
Time Delay indicator. Selected
programme will start as soon as
the countdown is over. Then, the
time needed for completion of the
running programme appears on the
display.
Press Time Delay key again
to return to the Main Menu
(programme selection screen)
without setting any time delay in
the Time Delay Menu.
Confirmation key does not have
any function in Time Delay menu.
System does not react when this
key is pressed.
To change a programme or function
when time delay is active
1. Press Start / Pause / Cancel key to
switch the machine in pause mode.
Countdown stops and Sandglass
indicator starts flashing.
2. After the countdown stops, change
the washing programme and add
or remove auxiliary functions as
described in “Programme selection”
and “To add auxiliary function to
the programme” sections.
3. Press Start / Pause / Cancel key to
start countdown for the time delay.
When you press the key without
switching the machine into Pause
mode, “Time Delay Active!” warning
will be displayed.
To set a new time delay when the
time delay is already active
1. Press Start / Pause / Cancel key to
stop the countdown.
2. Press Time Delay key to enter the
Time Delay menu.
3. Press > or < Selection keys to set
the new time delay.
4. Press Start / Pause / Cancel key to
start countdown for the time delay.
To cancel the Time Delay function
Press Start / Pause / Cancel key for
3 seconds. “Cancel...X” appears on
display. X denotes the time in seconds
you need to keep the key pressed.
Starting the programme
Press Start / Pause / Cancel key to
start the programme. Start ( ) indicator
will appear on the display.
Programme time will appear on the
Remaining Time indicator.
Your machine performs water
softening depending on the
hardness level of the supply water.
Remaining time displayed towards
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg GSN 9582 XB7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GSN 9582 XB7 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg GSN 9582 XB7

Blomberg GSN 9582 XB7 User Manual - German - 45 pages

Blomberg GSN 9582 XB7 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info