581433
32
Zoom out
Zoom in
Previous page
1/45
Next page
31 EN
Changing a programme
To change your selection after the
programme has started:
1. Press Start / Pause / Cancel key to
switch the machine in pause mode.
2. Press > or < Selection keys to
select the desired programme.
3. Start the new programme by
pressing Start / Pause / Cancel key
again.
The new programme will start from
the step where the previous one
has stopped. For example, if the
previous programme has remained
in drying step, new one will start
from the drying step as well.
If you want to run the new
programme from the very
beginning, first you must cancel the
current programme and then select
a new programme.
Canceling a programme
Press Start / Pause / Cancel key for
3 seconds to cancel the programme.
“Cancel...X” appears on display. X
denotes the time in seconds you need
to keep the key pressed.
“Finished” will appear 1 minute after
the process has started. After this, you
can set the new programme, function
or time on the machine.
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
End of programme
When the programme is over,
“Finished” will appear at the display
information line. End of programme
indicator will turn on in the programme
step follow-up indicators and 00:00 will
appear on the remaining time indicator.
1. Press On / Off key to turn off your
machine.
2. Close the tap.
3. Unplug the machine from the
socket.
Machine settings
You can use Settings Menu to change
the Language, Brightness, Volume,
Water Hardness and Melody settings
you are going to use in your machine,
or Restore Factory Settings.
To enter the “Settings Menu”:
1. Press On / Off key to turn on your
machine.
2. Press Function and Time Delay
keys together for 3 seconds.
3. “Settings Menu...X” appears on
display. X denotes the time in
seconds you need to keep the key
pressed.
4. After entering into the “Settings”
menu, press Function key to switch
between the main menus. You will
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg GSN 9582 A7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GSN 9582 A7 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info