581405
30
Zoom out
Zoom in
Previous page
1/42
Next page
29
EN
machine will fulfill the necessary
operations required to cancel the
programme. Once the Time Delay
function is cancelled, “00:00” will
appear on the Remaining Time
indicator.
C You can select and operate a
new programme following the
cancellation of the programme.
C There might be residues of
detergent or rinse aid left in the
machine and/or on the pieces
being washed depending on the
step the previous programme was
in at the time of such cancellation.
Changing a programme
1. Press Start / Pause / Cancel key
to switch the machine into Pause
mode.
2. Select the desired programme by
pressing the Programme Selection
key.
3. Press Start / Pause / Cancel key to
start the new programme.
C The new programme will start from
the step where the previous one
has stopped. For example, if the
previous programme has remained
in rinsing step, the new programme
will start from the rinsing step as
well. If you want to run the newly
selected programme from the very
beginning, you have to cancel the
programme first and then select a
new programme.
Salt indicator
Check the Salt indicator on the display
to see whether there is enough
softening salt in your machine or not.
You need to refill the salt container
whenever the Salt indicator lights.
C If the water hardness level is saved
as (r1), Salt indicator will never
come on even if the salt container
is empty. (Adjusting the water
hardness level is explained in
Water Softening System section.)
Rinse Aid indicator
Check the Rinse Aid indicator on the
display to see whether there is enough
softening rinse aid in your machine
or not. You must refill the rinse aid
container when the Rinse Aid indicator
comes on.
C If the Rinse Aid indicator is set
to OFF, Rinse Aid indicator will
never come on even if the rinse aid
container is empty.
Setting the Rinse Aid indicator
1. Turn on your machine by pressing
On / Off key while pressing and
holding the Half Load ( ) key
when the machine is in off position.
Keep holding the keys pressed in
this stage.
2. Release On / Off (1) key while
pressing and holding the Half Load
( ) key.
3. Keep the Half Load ( ) key
pressed for three seconds more.
4. Rinse Aid indicator lights up and
the Rinse Aid indicator status
saved on your machine appears on
the display as “ON” or “OFF”.
5. You can change the status of the
indicator as “ON” or “OFF” by
pressing the Start / Pause / Cancel
key.
C If you switch off the machine with
“On/Off" key when the status is
"ON", then the Rinse Aid indicator
will come on when the rinse aid
level in your machine becomes low
while the machine is in use. If you
switch off the machine by pressing
On/Off key when the status is set
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg GSN 9477 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GSN 9477 in the language / languages: English as an attachment in your email.

The manual is 9,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg GSN 9477

Blomberg GSN 9477 User Manual - German - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info