Manual Blomberg GSN 9122 (page 31 of 35) (English)

581443

Zoom out

Zoom in

1/35

Lime traces remain on dishes and glassware gains a misty appearance

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse

aid if necessary. Increase the rinse aid setting if there is enough amount of

rinse aid in the machine.

• Water hardness setting is low or salt level is insufficient >>> Measure the

hardness of the supply water appropriately and check the water hardness

setting.

• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling

hole while adding salt. Make sure that the salt reservoir lid is tightly closed

after finishing the filling process. Run the prewash programme to remove the

salt that spilled inside the machine. Since the salt granules that will remain

under the lid will dissolve during prewash, causing the lid loosen, check the

lid once again at the end of the programme.

There is a different odour in the machine

C A new machine has a peculiar odour. It will fade out after a couple of

washing.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter

system regularly as illustrated in section "Cleaning and Care".

• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going

to start the machine right after you have put the dishes into it, remove

the remnants on the dishes and run the Prewash programme without

detergent every 2 days. In such cases, do not close the door of the machine

completely in order to avoid odour build up in machine. You can also use

commercially available odour removers or machine cleaners.

Hi
My blomberg 9122 salt level indicator lights all the time after salt added Submitted on 3-12-2021 at 10:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GSN 9122 in the language / languages: English as an attachment in your email.

The manual is 9,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg GSN 9122

Blomberg GSN 9122 Quick start guide - English - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg GSN 9122 Manual

Product: