581465
29
Zoom out
Zoom in
Previous page
1/43
Next page
28
EN
Programme selection
1. Press On / Off key to turn on your
machine.
2. Refer to “Table of Programme Data
and Average Consumption Values”
to select a washing programme
suitable for your dishes.
3. Press Programme Selection key
repeatedly until the number of the
selected programme appears on the
Programme indicator .
Programme number will increase by
one each time you press the key.
C Number of the programmes on the
machine may change depending on
the model you have purchased.
Adding an auxiliary function to
the programme
Depending on your needs, you can
add Half Load (1/2), Tablet Detergent,
Express and Time Delay functions to the
programme you have selected.
Press the key of the function you wish to
add. Indicator of the relevant function will
appear on the display.
Setting Time Delay function
If an economical electricity tariff is
applied in your region, you can use the
Time Delay function to wash your dishes
during appropriate hours.
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions. Time Delay indicator ( )
will start flashing on the display.
2. Press Time Delay key to set the time
you wish. Time will increase with
increments of 30 minutes up to 24
hours every time you press the key.
3. Press Start / Pause / Cancel key.
Delay time will start countdown. Time
Delay indicator ( ) and Start / Pause
indicator will light continuously.
Remaining time will appear on the
Time Delay indicator. Programme
will start automatically when the
countdown is over.
Changing the settings during Time
Delay
While the Time Delay function is
activated, you can make changes
in the washing programme, other
auxiliary functions or the delay time.
1. Press Start / Pause / Cancel key
to switch the machine into Pause
mode. Countdown will stop.
2. Select the new programme,
auxiliary functions and time as
described in the sections above.
3. Press Start / Pause / Cancel key.
Countdown will resume or restart.
Canceling the Time Delay function
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. Release the key when the Start /
Pause indicator starts flashing. For
a couple of minutes the machine
will fulfill the necessary operations
required to cancel the function.
Once the Time Delay function is
cancelled, “00:00” will appear on
the Remaining Time indicator.
C You can select and start a
new programme following the
cancellation of Time Delay
function.
C Time Delay function can not be set
after the programme starts.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg GIN 9487 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GIN 9487 E in the language / languages: English as an attachment in your email.

The manual is 10,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info