Manual Blomberg FSM 1670 (page 9 of 82) (English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish)

474637

Zoom out

Zoom in

1/82

Instruction ManualGB

Temperature control

and adjustment

Temperature is controlled by the thermostat

knob (Fig. 2). "Number 4" is the coldest

setting.

The normal storage temperature of your

appliance should be -18 °C (0 °F). If the

thermostat knob is turned counter clockwise

from position 1, the appliance will be switched

off and “click” sound will be heard. Lower

temperatures can be obtained by adjusting the

thermostat knob towards Position 4.

We recommend checking the temperature with

a thermometer to ensure that the storage

compartments are kept to the desired

temperature. Remember to take the reading

immediately since the thermometer temperature

will rise very rapidly after you remove it from

the freezer.

Please remember that each time the door is

opened cold air escapes and the internal

temperature rises. Therefore never leave the

door open and ensure it is closed immediately

after food is put in or removed.

Before operating

Final Check

Before you start using the freezer check that:

1. The feet have been adjusted for perfect

levelling.

2. The interior is dry and air can circulate freely

at the rear.

3. The interior is clean as recommended under

"CLEANING AND CARE."

4. The plug is inserted into the wall socket and

the electricity supply is switched on. Avoid

accidental disconnection by taping over the

switch.

And note that:

5. You will hear a noise as the compressor

starts up. The liquid and gases sealed within

the refrigeration system may also make some

noise, whether the compressor is running or

not. This is quite normal.

6. If you are going to freeze fresh food, you

must press the fast-freeze switch.

7. We recommend setting the thermostat knob

at 2 and monitoring the temperature to ensure

the appliance maintains desired storage

temperatures (see section "Temperature control

and adjustment").

8. Do not load the appliance immediately it is

switched on. Wait until the correct storage

temperature has been reached. We recommend

that you check the temperature with an accurate

thermometer (see; Temperature Control and

Adjustment).

9. If you find the freezer door difficult to open

just after you have closed it, don’t worry. This

is due to the pressure difference which will

equalize and allow the door to open normally

after a few minutes.

10. You will hear a vacuum sound just after

closing the door. This is quite normal.

around the appliance to ensure free air

circulation.

• Put the back airing lid to the back of your

refrigerator to set the distance between the

refrigerator and the wall.

3. The appliance should be positioned on a

smooth surface. The two front feet can be

adjusted as required. To ensure that your

appliance is standing upright adjust the two

front feet by turning clockwise or counter-

clockwise, until firm contact is secured with the

floor. Correct adjustment of feet prevents

excessive vibration and noise.

4. Refer to "Cleaning and Care" section to

prepare your appliance for use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg FSM 1670 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 6,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blomberg FSM 1670 Manual

Product: