350214
12
Zoom out
Zoom in
Previous page
1/14
Next page
6
Instructions for use
Cleaning and care
1. We recommend that you switch off the
appliance at the socket outlet and pull out the
mains plug before cleaning.
2. Never use any sharp instruments or abrasive
substances, soap, household cleaner, detergent
or wax polish for cleaning.
3. Use luke warm water to clean the cabinet
of the appliance and wipe it dry.
4. Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda to one
pint of water to clean the interior and wipe it
dry.
5. Make sure that no water enters the
temperature control box.
6. If the appliance is not going to be used for
a long period of time, switch it off, remove all
food, clean it and leave the door ajar.
7. We recommend that you polish the metal
parts of the product (i.e. door exterior, cabinet
sides) with a silicone wax (car polish) to protect
the high quality paint finish.
8. Check door seals regularly to ensure they
are clean and free from food particles.
9. Never:
Clean the appliance with unsuitable material;
e.g. petroleum based products.
Subject it to high temperatures in any way,
Scour, rub etc., with abrasive material.
10. Removing the door shelves :
To remove a door shelf, remove all the contents
and then simply push the door shelf upwards
from the base.
- If you have adjusted the compartment at right
or left chiller zone compartment, you can not
slide it to right or left. If you slide it, since it
becomes far away from the air channel, required
coldness can not be achieved in this
compartment.
WARNING! Lood food chiller zone/second
layer crisper according to your selection (crisper
or chiller zone). Otherwise your food may face
extra cooling or insufficient cooling.
You can also move chiller zone/second layer
crisper compartments as shown in Fig.10-11
Beverage bin
This feature is designed for horizontal storage
of bottles. You can slide beverage bin in the
horizontal direction to adjust the useful space
below it.
When you want remove the beverage bin,
remove the glass shelf from the cabinet. Then
by sliding the beverage bin to left you can
remove it. To fit it back perform the above
action in reverse order (Fig.9).
Replacing the interior
light bulb
Should the light fail, switch off at the socket
outlet and pull out the mains plug.
Then ensure the bulb is screwed securely in the
bulb holder. Replace the plug and switch on.
If the light still fails, obtain a replacement E14
screw-cap type 15 Watt (Max) bulb from your
local electrical store and then fit it. Carefully
dispose of the burnt-out light bulb immediately.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg ctn 1400 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg ctn 1400 x in the language / languages: German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info