773993
12
Zoom out
Zoom in
Previous page
1/18
Next page
Page 10
BLENDED TEXTURE UNSATISFACTORY: If the blended texture of
product is lumpy or uneven, do the following:
● Make sure the mixture is not cavitating during the cycle. Cavitation is
a condition in which the blender blade spins freely in an air pocket within
the drink mix because the mix is too cold or too solid. This problem
can be corrected by increasing the mix temperature (by reducing ice,
increasing liquid and/or insuring that the frozen ingredients used in the
recipe are never colder than 10 degrees Fahrenheit or -12 degrees
Celsius). When the right combination of correctly tempered ingredients
is used, the resulting drink is always smooth, thick and blendable without
operator attention.
● Increase cycle time. If the drink is mixing well but has not had enough
time for complete blending, try a longer cycle (usually by using a higher
button number to start the blender) or touch and hold the “Pulse” button
for required extra blending time.
● Make sure the drive shaft on the jar is fully engaged into the drive
socket or that the blade is rmly afxed to the drive shaft.
TRIED EVERYTHING? If none of the preceding suggestions work,
contact your Blendtec service agent for further assistance.
5.5 CLEAN BLENDER JAR DAILY
1. Using hot tap water, add 4 cups (1liter) of water and 1 1/2 teaspoons
(7 ml) of liquid dish washing soap to the blender jar.
2. Place the lid tightly onto the jar. Place the blender jar on the motor
and press the “pulse” button for 15 seconds.
3. Rinse with clear water until all soap is rinsed from jar and lid.
4. Store the jar right side up wherever possible. If jars are stored upside
down, insure that no water is allowed to stand in the bottom around the
blade drive shaft.
5. 64 ounce jars may be stacked one inside the other, but insure that the
handles are alternated. NEVER STACK THESE JARS WITH HANDLES
INTERLOCKED!
NOTE: When washing the blender jar in a dishwasher, the jar should
be placed on the top rack. Blender jars are dishwasher safe up to 220
degrees Fahrenheit (104 degrees Celsius).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blendtec Xpress at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blendtec Xpress in the language / languages: English as an attachment in your email.

The manual is 2.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info