626845
5
Zoom out
Zoom in
Previous page
1/16
Next page
1
Important Safeguards
PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USING YOUR Mix-n-Blend II™
1. DO NOT operate the Mix-n-Blend II™ power unit
in water or any other liquid. DO NOT use the unit
outdoors.
2. Close supervision is necessary when the machine
is being used by or near children.
3. AVOID CONTACT WITH MOVING PARTS. Keep
fingers, hands, hair and clothing away from all moving
parts. Keep all utensils away from the drive socket and
blender jar blades during operation. Metal utensils may
damage blades. NEVER put hands into the blender
jar or add substances by hand when the blender jar is
on the motor base. NEVER touch the blade with your
fingers whether it is on or off the motor base. NEVER
place jar into drive socket if blender motor is operating.
DO NOT rock the blender during operation.
These precautions will prevent personal injury and/or
damage to the blender.
4. DO NOT let the cord hang over the edge of work
surface.
5. DO NOT operate with a damaged cord or plug.
If the appliance malfunctions, or if it is dropped
or damaged in any manner, return the mixer to
Blendtec for examination, repair, or adjustment.
6. UNPLUG the machine when not in use or while
cleaning. Remove beaters from mixer before
washing.
7. All removable parts are dishwasher safe on TOP
RACK ONLY. Dishwasher temperature should not
exceed 220° Fahrenheit.
8. Always operate blender with lid cover in place.
9. Blender blades are sharp. Handle carefully.
Component Overview
1. POWER UNIT
This is the main part of the mixer that includes
the electrical controls, the motor assembly,
drive gears, and the control panel. Each unit has
been factory tested to ensure that all internal
components are in proper working order. The
cover must not be removed. There are no
adjustments that can be made and no serviceable
parts within the power unit. All service must be
performed by the Blendtec factory. Removing the
cover may result in damage to the machine AND
WILL VOID THE WARRANTY.
2. POWER SWITCH
The power switch is located on the lower right
corner of the machine (below the control panel).
Power can be immediately turned off using this
switch.
3. LOW SPEED DRIVE
Because of the great variety of options on the
Mix-n-Blend II™, two drives are required. The low
speed drive is located on the lower left section of
the mixer. The low speed drive operates the bowl.
4. HIGH SPEED DRIVE
The high speed drive is located on the upper right
side of the mixer and is used to drive the blender.
5. CONTROL PANEL
The control panel is used to control all functions
of the Mix-n-Blend II™. The chart below gives a
brief overview of the button functions:
BUTTON FUNCTION
Jar Accesses the Blender Menu
Bowl Accesses the Mixer Menu
Auto-Knead Starts Auto-Knead cycle
Speed Manually adjust speed setting
Time Manually adjust length of cycle
Up/Down Arrows Scrolls through cycle menus,
adjusts speed and time settings
Pulse Pulses at maximum speed while
button is pressed
Start/Stop Starts and stops cycles and/or
manual operations
More on the functionality of the control panel can
be found in the Operating Instructions.
6. DRIVE SHAFT
The drive shaft is used in all mixing operations.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blendtec Mix n Blend II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blendtec Mix n Blend II in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info