Manual Blendtec CONNOISSEUR 825 (page 51 of 156) (English, French, Spanish)

626840

Zoom out

Zoom in

1/156

there has been an error� There are error messages from E-01 through E-06� If any of

these errors appear, press the cancel/exit button to clear the message� If the error

message reappears please contact your Blendtec Service Agent�

EZ 600™/Chef 600™

Overtemp Error — This indicates that the motor is overheating� The blender

has been disabled until the unit cools to operating temperatures� If the

blender does not work after 20 minutes or more of cooling time, please

call your Blendtec Service Agent�

Overload Error — This indicates an overload on the motor�

1� Clear the error message by pressing any button or turning the blender off and

on again�

2� Remove the jar, and run the blender to determine whether the issue relates to

the jar or the motor�

3� With the jar removed, check for blockage in or around the socket on the motor

base and the blade assembly on the jar�

4� Place the jar securely on the motor base, and touch to pulse the blade

through the mixture�

5� Ensure the jar is not loaded with excessively hard or thick ingredients�

If overload condition re-occurs, contact your Blendtec service agent�

6.3 NOISE LEVEL CHANGES

If the blender noise level has increased from original levels, determine whether

the sound is coming from the blender motor or jar�

1� Blender Motor: Remove the jar from the motor base and run the motor� If it is

excessively noisy, contact your Blendtec service center for evaluation�

2� Jar: After checking the motor, place the jar back on the motor with about 16 oz

(475 ml) of water� Run the motor for a few seconds using the pulse button� (If

you have more than one jar, test a different jar to determine whether the sound

is different�) If a jar is excessively noisy or if the blade assembly seems loose or

sounds “gravelly” when turned by hand, contact your Blendtec service center�

6.4 NOT BLENDING OR UNSATISFACTORY BLENDED TEXTURE

If the your blender has stopped blending or if the blended texture of product is

lumpy or uneven, do the following:

1� Ensure the mixture is not cavitating during the cycle� Cavitation is a condition in

which an air pocket forms within the drink mix because the mix is too cold or

too solid� The blender blade then spins freely in this cavity� This problem can be

corrected by increasing the mix temperature by either reducing ice, increasing

liquid and/or ensuring that the frozen ingredients used in the recipe are never

colder than 10 °F (-12 °C)�

2� If the recipe is mixing well but has not had enough time for complete blending,

increase cycle time� Try a longer cycle or touch and hold the Pulse button for

the required extra blending time�

3� Make sure the jar is fully seated on the blender base�

4� Check if the blade is ﬁrmly afﬁxed to the drive shaft� Hold the drive shaft in one

ENGLISH

"MULTI *a11569" this message will appear on the display Submitted on 19-7-2022 at 23:01
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blendtec CONNOISSEUR 825 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5.8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blendtec CONNOISSEUR 825

Blendtec CONNOISSEUR 825 User Manual - English - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blendtec CONNOISSEUR 825 Manual

Product: