699020

Blaupunkt WiFi LampCam HOS-X20 Manual

9
Zoom out
Zoom in
Previous page
1/67
Next page
9
English
5.1. Sensitivity Setting:
Scroll down to “Sensitivity Setting”. At “Detect Mode” select “PIR” to activate PIR motion detection (factory
default setting). The PIR motion detection has a 5m detection range. To deactivate motion detection
select “OFF” .
5.2. Lighting Setting:
Scroll down to “Lighting Setting” and select the desired “Lighting auto mode”.
On the LampCam menu list tap the cong LampCam icon and tap the settings icon from the desired
LampCam. Then tap the “Advanced” button to enter the “Advanced Settings Menu”. For security reasons
you will be asked to enter the “Admin password”.
5. LampCam conguration
By trigger: Select this option to turn the light ON for 1 minute after PIR motion detection. (Please check
in chapter 5.1. that PIR detection is activated) After one minute the light will turn OFF. (PIR needs to be
selected on “Sensitivity Settings”). Light will turn ON only if there is a low environment illumination.
By manual Schedule: Select this option to turn the light ON according to a pre-
congured schedule. To set up a schedule select “Lighting Schedule Modify”.
Select a Starting time: Click the 00:00AM blue button at the top. At the top select
the days of the week to be included. Select the time when the light should be
turned ON. Time format is 12H, select AM or PM to dene the time.
Select a Ending time: Click the 00:00AM black button at the bottom. At the
bottom select the days of the week to be included. Select the time when the light
should be turned OFF. Time format is 12H, select AM or PM to dene the time.
Click the “Save” button at the bottom to save all the settings.
5.3. SD Card Setting:
Click “Format SD-Card” to perform a SD-Card format. This will erase all the videos and images on the SD-
Card. If the “Over write SD-Card” check box is activated the LampCam will overwrite the oldest recording
once the storage is full. If deactivated the LampCam won’t record any event once the storage is full.
Note:
PIR trigger for motion detection and manual schedule will work only under AUTO mode. Refer to
chapter “6. Live View Functionalities” for more details.
Note: It is mandatory to select the days of the week, otherwise the schedule wont work.
5.4. Notications:
Push notications: Scroll down to “Notify Enable”. Enable
/ Disable push notications when movement is detected
under arm mode. (Enabled by default)
Email notications: To enable the same information as push
notications for e-mail, scroll down to “Email Setting” and
click “Set e-mail”. Cong according to the right hand chart.
Note: Ensure that “Two-factor authenticator” is disabled on
your sending e-mail account. (e.g. Google, Outlook365). To
learn more, check instructions from your e-mail provider.
SSL
Activate / deactivates SSL encryption
SMTP Server
Input the server SMTP address.
To learn more, check instructions
from your e-mail provider.
For Gmail use smtp.gmail.com
SMTP Port
If SSL is not activated use “25”
If SSL is activated use “465”
Username
The user name of the sender email
account. E.g: username@gmail.com
Password
The password of sender email
account.
Receiver
Receiver email address
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt WiFi LampCam HOS-X20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt WiFi LampCam HOS-X20 in the language / languages: German as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info