165764
13
Zoom out
Zoom in
Previous page
1/33
Next page
13
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Care of your KeyCard/
TMC DriveCard
To ensure that the cards will function pro-
perly it is important that the contacts are free
from any foreign particles. Avoid direct skin
contact.
Never leave the cards exposed to direct
sunlight.
If necessary, clean the KeyCard contacts
using a cotton swab dipped in rubbing alco-
hol.
When outside of the vehicle, keep the TMC
DriveCard in its cover.
Never bend the KeyCard or Drive-
Cards. This could result in their de-
struction.
Displaying the radio pass data
You can use the KeyCard supplied with your
set to display the radio pass data such as
the model name, product number (7 6..) and
serial number.
Please refer to the section on “DSC pro-
gramming - READ KC”.
Short Additional Memory
(S.A.M.)
The second KeyCard available from your
specialised dealer allows you to read out
short information under the DSC menu item
“READ KC”. This information will run throu-
gh the display and could include, for examp-
le, the phone number of your car repair ser-
vice or the emergency call number of your
automobile association.
The freely selectable text with a maximum
of 162 characters can be programmed by
any dealer who has the required equipment
available.
Turn On Message (T.O.M.)
The second KeyCard available from your
specialised dealer also allows you to dis-
play a special turn-on message each time
the radio is switched on.
The freely selectable text with a maximum
of 48 characters can be programmed by any
dealer who has the required equipment
available.
Each time you turn on your system with the
second KeyCard, the programmed text will
appear in the display.
Flashing light as visual theft
protection
Flashing KeyCard tongue
Once you have parked your vehicle and re-
moved the KeyCard, the KeyCard tongue
can be programmed to flash as an extra anti-
theft device.
Important: it is necessary that the positive
power supply line and the permanent +12 V
lead are connected such as described in the
installation instructions.
“LED ON” must be selected in the DSC
mode.
If necessary, please refer to the section on
“DSC programming - LED”.
Switching off the flashing light
The flashing light can be switched off by
selecting “LED OFF” in the DSC menu.
KeyCard/TMC DriveCard theft protection system
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt viking tmc 148 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt viking tmc 148 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt viking tmc 148

Blaupunkt viking tmc 148 User Manual - German - 32 pages

Blaupunkt viking tmc 148 Installation Guide - All languages - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info