167449
12
Zoom out
Zoom in
Previous page
1/52
Next page
12
THA 275 PnP
Applicazioni e collegamento degli altoparlanti:
Stereo-Mode
Max Power
Max Power
RMS Power
RMS Power
2 x 150 Watt / 4 Ω
2 x 180 Watt / 2
2 x 75 Watt / 4 Ω
2 x 90 Watt / 2
Fig. 4
Fig. 4
Modalità Bridge
Max Power
RMS Power
1 x 400 Watt / 4
1 x 190 Watt / 4
Fig. 4
Fig. 4
Potenza RMS secondo CEA-2006
(<1% distors./+14,4 V)
Risposta in
frequenza
10 Hz - 30.000 Hz
Rapporto segna-
le/disturbo
> 95 dB @ RMS Power
Rapporto segna-
le/disturbo
> 78 dB @ 1 W/ 1 kHz
Fattore di distor-
sione (RMS)
<0,05%
Stabilità
2 Ω (4 Ω con funzio-
namento ponticellato)
Sensibilità in
entrata
0,3 - 8 V
Sensibilità
in entrata
Direct AUX IN
0,3 V
Filtro passabasso
(Low Pass)
50-250 Hz
Filtro passaalto
(High Pass)
10-250 Hz
Bass Boost
da 0 dB a +12 dB
Entrate
2 x Cinch/RCA
2 x HighLevel speaker PnP
1 x Direct Aux Inputs,
3.5 mm stereo
Uscite
2 x altoparlante
Dimensioni
L x H x P (mm)
170 x 42 x 160
(6.7"x1.7"x6.3")
Attacco più / meno
- Si raccomanda di utilizzare una sezione trasversale
minima di 1,5 mm
2
(A.W.G 16).
Sul cavo adattatore veicolo (7 607 622 ...) il
cavo positivo permanente 12V deve essere
collegato con l'amplifi catore cavo + (vedi Fig. 7).
- Posare i cavi positivi per la batteria comunemen-
te reperibili in commercio e collegarli mediante
un portafusibile, posizionato ad una distanza di
30 cm dalla batteria.
- In presenza di fori con bordi taglienti utilizzare
appositi passanti per cavi.
- Collegare in modo sicuro i cavi negativi comunemente
reperibili in commercio ad un punto di massa privo di
disturbi (vite della carrozzeria, lamiera della carrozze-
ria), ma non al polo negativo della batteria.
- Raschiare la superfi cie di contatto del punto di massa,
no a farla diventare lucida ed ingrassare con grasso
a base di grafi te.
Fusibili integrati (Fuse)
I fusibili integrati nell'amplifi catore (Fuse) proteggono
lo stadio fi nale e l'intero sistema elettrico in caso di
guasto. In caso di utilizzo di un fusibile di riserva, non
bypassare mai i fusibili né sostituirli con altri di ampe-
raggio maggiore.
Esempi di collegamento
Collegamento dell'alimentazione
di tensione ................................................Fig. 2, 2a, b
Collegamento all'autoradio con
attacco Cinch ............................................Fig. 3
Collegamenti degli altoparlanti ................Fig. 4/5
Direct Aux Input.........................................Fig. 6
+12V
Collegare l'attacco Remote dell'amplifi ca-
tore con una sorgente di tensione aziona-
bile +12 V.
In questo modo, sarà possibile attivare/disattivare
l'amplifi catore mediante il tasto On/Off dell'autoradio.
Nota:
In caso di collegamento tramite un cavo PnP-INPUT,
l'attivazione avviene in modo automatico.
! Come particolarità, dopo l'attivazione automatica
sull'ingresso/uscita Remote sono adesso disponibili
+12V/200mA come tensione di commutazione uscita.
Collegamenti livello alti (solo mediante cavo
PnP High-Input)
L‘amplifi catore è dotato di collegamenti a livello alto
(PnP Input), per poter essere collegato ad apparecchi
radio senza uscite preamplifi catore . In questo modo
è possibile eseguire un collegamento diretto all'uscita
altoparlanti dell'autoradio.
Nota:
I connettori output/input non utilizzati devono essere
collegati dal cavo PnP (vedi Fig. 2).
Collegamento Direct Aux Input
Possibilità di collegamento all'autoradio in caso di
ingresso AUX non presente od occupato
Qui è possibile collegare diverse fonti esterne, ad
esempio un lettore MP3 o un navigatore mobile,
con uno spinotto jack da 3,5 mm direttamente sul-
l'ingresso Direct Aux Input. In questo modo, tutte
THA_275_0607.indd 12THA_275_0607.indd 12 07.06.2007 14:06:02 Uhr07.06.2007 14:06:02 Uhr
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt tha 275 pnp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt tha 275 pnp in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info