716230

Blaupunkt STSK 757301 Manual

13
Zoom out
Zoom in
Previous page
1/16
Next page
Product Specications
Voltage 230-240V
Power 800W
Variable Speed 800 – 3000 SPM
Bevel Angle 0 - 45°
Orbital Positions 3
Stroke Length 20mm
Maximum Material Thickness 80mm Wood, 8mm Steel
Dust Extraction Yes
Weight 2.7Kg
Materials You Can Cut
This jigsaw is a versatile tool that allows you to cut many different types of materials. Some of these materials include:
• Wood products such as lumber, hardwood, plywood, composite board, and panelling
• Drywall
• Fibre board and plastic
• Metals such as pipe, steel rods, sheet steel, aluminium, brass and copper.
NOTE: There are many different types of blades available. Generally, there are metal cutting blades (fine teeth) and wood cutting
blades (coarse teeth). Use the correct blade for your application. The packaging on the blade will indicate the type of materials each
blade is designed to cut.
General Cutting
Clearly mark the workpiece to locate the position of the cut.
Hold smaller workpieces with a vice. Clamp larger workpieces to a workbench or table.
WARNING Any workpiece that is not adequately clamped in place may come loose and cause serious injury. Never hold the
workpiece with your hand.
WARNING Keep hands and fingers away from between the motor housing and blade holder. Do not reach underneath workpiece
while jigsaw is running.
• Rest the front of the jigsaw base on the workpiece and align cutting edge of the blade with the cutting line on your
• workpiece Make sure the power cord is out of your way and not in the path the blade will follow.
• While firmly gripping the jigsaw, and with the blade NOT in contact with the surface to be cut, start the jigsaw by pressing the
lock-off button and squeezing the trigger switch.
• Once the jigsaw has reached the desired speed, gradually bring the moving blade into contact with the workpiece at the
appropriate location.
NOTE: Do not force the jigsaw. Use only enough force to keep the blade cutting. Excessive pressure on the blade will cause it to
bend and twist, which may result in breaking the blade.
Metal Cutting
Many types of metal can be cut with your jigsaw. When cutting any kind of material, be careful not to twist or bend the blades. Do
not force the blade. If the blade vibrates excessively, use a finer toothed blade. If the blade heats excessively, reduce the speed of
cutting.
Clamp all work firmly and jigsaw as close as possible to the clamping point to eliminate any vibration of the work being cut.
When cutting conduit, pipe or angle iron, clamp work in a vice if possible and saw close to the vice. To cut thin sheet materials place
the material between hardboard or plywood and clamp the layers to eliminate material vibration and tearing. By doing this, the
material will be cut smoothly. Lay out your pattern or cutting lines on top of the ‘sandwich’.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt STSK 757301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt STSK 757301 in the language / languages: English, German as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info