698445
7
Zoom out
Zoom in
Previous page
1/92
Next page
5
1. Control Panel
1a. DRY TANK - Information about the empty
water tank (see FILLING THE WATER
TANK)
1b. The “greater-steam-flow” icon
1c. The “ECO steam flow” icon
1d. Control lamp - information about
thermostat operation. When the light
flashes, the steam station heats up.
When it is on continuously, the steam
station is ready for ironing.
1e. Switch
1f. Set – steam-flow-intensity selection
button (intensive / Eco)
1g. Service button (iron cleaning)
1h. Sleep-mode icon
2. Steam-burst button
3. Soleplate
4. Steam hose
5. Iron stand
6. Water tank
7. Water inlet
8. Steam-hose bands
BEFORE FIRST USE
Remove all papers, cartons, and foils protecting the appliance and its parts.
The iron may emit a delicate smoke and smell the first time it is used. It is recommended to warm up
the iron before ironing and use it on an old fabric few times.
FILLING THE WATER TANK
Make sure that the steam station is disconnected from the power supply before filling the tank. Open
the water-inlet cap and fill the tank through the inlet with the beaker.
Do not exceed the maximum level (1.6 l)
IRONING
After filling the water tank, connect the steam station to the power source. Turn off the steam station
by pressing the button (1e). Set the required steam intensity by pressing the steam-intensity button
(SET - 1f ). The chosen setting will be presented by a highlighted symbol within the control panel.
When the steam-readiness lamp (1d) stops blinking and lights permanently, the ironing can start.
Press the steam-release button to release the steam from the iron.
The no-water indicator light will come on after 30 seconds, when there is no water in the tank. Water
must be poured into the tank through the water inlet.
When the ironing is finished, turn off the steam station by pressing the power button for 3 seconds
(1e).
SWITCHING OFF THE STEAM STATION
To switch off the steam station, press and hold the power button for 3 seconds. Any icons and indicator
lamps will go out. Then disconnect the steam station from the power source.
THE ADDITIONAL STEAM-EMISSION FUNCTION
If increased steam emission is required, press the steam-release button twice. The iron will release the
increased amount of steam and then return to a constant level of steam generation.
THE AUTOMATIC SHUT-OFF FUNCTION
The iron automatically switches off when it remains still for 10 minutes. The indicator light and the
sleep-mode icon will flash, and the steam station will emit a sound signal.
Press the steam button to continue ironing. Wait for the indicator light to begin glowing continuously
before ironing.
CLEANING AND MAINTENANCE
Never immerse the iron or the steam station in water. Make sure that the iron and the station have
SSP701
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt SSP701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt SSP701 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info