698446
8
Zoom out
Zoom in
Previous page
1/80
Next page
6
1. Steam intensity knob
2. Steam release button with a lock
3. Temperature control knob
4. Water tank with a boiler
5. Filler cap with a safety valve
6. Iron thermostat control light
7. Soleplate
8. ON/OFF switch
9. Steam generator switch
10. Lack of water control light
11. Steam readiness control light
12. Steam pressure indicator for the boiler
13. Steam hose
14. Measuring cup
BEFORE FIRST USE
Remove all paper, cartons, and foil protecting the appliance and its parts.
The iron may emit a delicate smoke and smell the first time it is used. It is recommended that the iron
be warmed up before ironing and that it be used on an old piece of fabric a few times.
FILLING THE WATER TANK
Make sure the appliance is disconnected from the power source. Set the steam intensity to "no steam".
Unscrew the filler cap of the water tank. Pour a measured amount of water using the measuring cup.
Do not exceed the indicated capacity of the tank.
Tighten filler cap.
IRONING
After filling the water tank, connect the steam station to the power source. Turn the iron switch (7) and
steam generator (8). Set the desired iron temperature according to the recommendations. Set the
desired steam intensity with the knob.
When the steam readiness control light lights up, ironing can begin. Press the steam button to release
steam from the iron. In order to use steam in a permanent mode move the button to lock it.
When there is no water in the tank, the lack of water indicator lights up.
After ironing, set the steam intensity to 0 and the temperature knob to the minimum position.
SETTING THE IRONING TEMPERATURE
Set ironing temperature using the temperature control knob, adjusting it to the fabric being ironed.
First iron fabrics that require the lowest temperature.
low temperature - synthetic fabrics, silk
medium temperature – wool
high Temperature - cotton
MAX the highest temperature - linen
If you wish to decrease the temperature, wait until the pilot light turns on before continuing to iron.
CLEANING AND MAINTENANCE
Never immerse the iron in water. Make sure that the iron cools down. Wipe the body of the iron with a
slightly damp cloth, then wipe until it is dry. The soleplate should be wiped with a soft cloth.
It is recommended that the water tank be rinsed from time to time. Pour some water into the tank, rinse
the water tank, then pour the water out of the tank.
••
SSB501
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt SSB501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt SSB501 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info