790566

Blaupunkt Skagen 400 DAB Manual

26
Zoom out
Zoom in
Previous page
1/236
Next page
EN
7. Analogue radio: VHF/medium wave (FM/AM)
Select one of the sources/memory levels FM1, FM2, FMT, AM
or AMT with the SRC button
Note: Some memory sources/levels are inactive depending
on the setting; for example, only the FM1 memory level is
active. See "SETTINGS".
Note: There are 5 memory slots available for each memory
level.
Station search
Use the right button/knob to start a station search by briefly
turning it up (clockwise) or down (counter clockwise). The
search stops automatically at the next station found.
Note: The search sensitivity can be set in the settings, see
"SETTINGS".
You can also set the frequency manually if the station signal is
too weak, and the search does not stop at the desired
frequency. To do this, briefly press the right button/knob once.
The display will show MANUAL. You can now turn the right
button/knob until you set the desired frequency.
PTY Search
If the PTY (programme type) function is enabled (see
"SETTINGS"), the PTY function can also be selected by pressing
the right button/knob.
Turn the right button/knob to start searching for the preset
PTY code (see "SETTINGS" for the pre-selection of PTY type).
Storing/selecting saved stations
You can save your favourite stations in the station memory
using the 1-5 buttons. Each memory level can store up to 5
stations.
Set the desired station as described in STATION SEARCH. Then
press the desired memory button for about a second until you
hear a beep confirming that the station has been saved.
Release the button after the beep.
You can recall a saved station by briefly pressing the memory
button.
Storing stations automatically (Travelstore)
In the memory levels with T (FMT and AMT) designation, you
can store up to 5 stations with the best signal strength using
the automatic search (Travelstore).
To do this, select the desired memory level using the SRC
button, then press and hold the SRC button again until T-
STORE appears on the display.
Note: If the Travelstore storage is started at a memory level
other than FMT/AMT, the system automatically switches to the
Travelstore storage memory level and automatically activates
it in the settings if necessary. Only the stations at the
Travelstore memory level are saved/changed.
Playing saved stations (P-SCAN)
You can play back all stations at the selected memory level:
To do this, press the MENU button for more than one second.
The display will show P-SCAN and flash the current radio
frequency/station.
The P-SCAN function continues until terminated by pressing
the right button/knob.
Playing the available stations (SCAN)
You can play all stations in the selected frequency band:
To do this, press the right button/knob for more than one
second.
The display will show SCAN and flash the current
frequency/radio station.
The scanning (SCAN) continues until stopped by pressing the
right button/knob.
Changing the display
Use the DIS button to toggle between different display
information:
* Station designation
* PTY (programme type)
* Radio text
* Memory/memory level + frequency
* Memory/memory level + time
Note: The display function availability depends on the
station and reception quality
Further features or options:
See "SETTINGS".
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Skagen 400 DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Skagen 400 DAB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info