698739
7
Zoom out
Zoom in
Previous page
1/92
Next page
5
1. Lid with feeder
2. Vertical screw
3. Extrusion bowl
3a. Filter guides
3b. Switch for closing the juice flow
4. Juice filters (thick, fine filter)
5. Horizontal worm
6. Blocking element with the pulp outlet
7. Juice cup
8. Container for pulp
9. Pusher
10. Body
BEFORE FIRST USE
1. Remove all papers, cartons, foil which secure the juicer and juicer parts.
2. Clean the juicer following the advice in Cleaning and Maintenance chapter.
3. It is recommended to assemble and disassemble the juicer before using.
ASSEMBLING THE DEVICE
1. Place the bowl (3) onto the body of the unit (10), and make sure that the three tabs fit into the
holes in the bowl.
2. Insert the selected filter (4) into the guides (3a).
3. Place the horizontal worm (5) in the extrusion bowl so that it fits into the drive.
4. Insert the locking element (6) into the extrusion bowl, taking note of the printed symbols, and
turn clockwise to the closed position.
5. Insert the vertical screw (2) on the top.
6. Place the cover onto the bowl, paying attention to the symbols.
FOOD PREPARATION
Remove stones (plums, peaches, cherries etc).
Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
Soft-skinned and other foods just need washing.
Cut the food into smaller pieces to fit the feed tube.
USING THE DEVICE
To start the juicer, press and hold the On/Off button for 3 seconds. The key lock will be disabled.
Start the juicer with the On/Off button for normal mode, or use the Soft button for pressing soft fruit.
Place fruit or vegetables in the feeder, and slowly push through by pressing the pusher.
Use the "reverse" function only when the screw conveyor is blocked or clearly slows down.
Do not switch the direction of the rotation until the unit has come to a complete stop.
Some very hard foods may make your juicer slow down or stop. If this happens switch off and unblock
the filter.
Insert soft food slowly to get the most juice.
Some fruits and vegetables may block filter during work which cause decrease of the juicing efficiency.
If you observe that during work, efficiency is getting to low, cleaning of filter is needed.
CLEANING AND MAINTENANCE
Warning: The juicer has a rinse-during-operation function, activated between the pressing of various
fruits or vegetables. Close the juice flow (3b), pour some water into the feeder (approx. 0.1-0.2l), and
start the cleaning mode by pressing the "Clean" button. The juicer will perform 6 rotation cycles and
switch off. Open the juice flow.
For easy cleaning - immediately after each use rinse removable parts under running water (to remove
wet pulp). Allow parts to dry.
After disassembling the unit all removable parts may be washed in hot soapy water.
The lid, bowl, pulp container, juice cup are dishwasher safe.
SJV701
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt SJV701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt SJV701 in the language / languages: English, German as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info