165751
15
Zoom out
Zoom in
Previous page
1/30
Next page
43
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Tune into a station with the rocker
switch (either automatically or manual-
ly).
Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds) or un-
til you hear a beep.
Now the station has been stored.
The display will indicate which station has
been stored.
Note:
If you attempt to store a station which is al-
ready stored, the corresponding station and
the station preset will flash in the display if
you are in a different memory bank.
Storing stations with the stron-
gest reception automatically
with Travelstore
You can automatically store the six FM sta-
tions with the most powerful signals in your
current reception area sorted according to
their signal strength. This function is parti-
cularly convenient on longer trips.
Press the “BA/TS” button for 2 seconds.
“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the name of the strongest stati-
on will appear in the display and begin to
play.
If desired, stations can also be stored ma-
nually in the Travelstore bank, refer to the
section on “Storing stations”.
Recalling stored stations
You can recall any stored station at the touch
of a button.
Select the waveband by pressing BA/
TS. For FM, also choose the corre-
sponding memory bank by pressing
the BA/TS button as many times as
necessary until the desired bank ap-
pears in the display.
Press the corresponding preset button
briefly to recall the station.
Scanning stations with Radio
Scan
You can scan through all of the stations in
your reception area.
To start the Scan function:
Press “SC” for approximately 2 secon-
ds.
The scanned frequency or the station name
will start flashing in the display.
During the scanning process “FM-SCAN” or
“AM-SCAN” will light up in the display.
If you want to continue listening to the stati-
on which is being scanned, then
Press “SC” briefly.
This ends the Radio Scan function.
If no station is selected, the scan function
will switch off after the frequency band has
run through. The station selected previous-
ly will resume play.
Changing the scan time
The scan time per radio station can be set
to between 5 and 20 seconds.
For more detailed information, refer to the
section on “DSC programming - SCANTI-
ME”.
Selecting the automatic tuning
sensitivity
You can alter the automatic tuning sensiti-
vity.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, more distant stations.
To switch the automatic tuning sensitivity
and program the sensitivity level, refer to the
section on “DSC programming “.
BA AcaBiaMonSevRDM168/169gb® 28.05.2002, 15:48 Uhr43
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt sevilla rdm 168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt sevilla rdm 168 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt sevilla rdm 168

Blaupunkt sevilla rdm 168 User Manual - German - 31 pages

Blaupunkt sevilla rdm 168 User Manual - Dutch - 31 pages

Blaupunkt sevilla rdm 168 User Manual - French - 32 pages

Blaupunkt sevilla rdm 168 Installation Guide - All languages - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info