614918
25
Zoom out
Zoom in
Previous page
1/32
Next page
55
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Press DSA twice briefly.
The current DNC setting appears in the dis-
play.
Use << >> to select the setting you
wish to use for the HiFi calibration.
Press DSA twice briefly.
Press
until “EL” appears.
Press the corresponding button (1 to 5)
for approx. 2 seconds (Beep).
“MicPos 8” appears in the display, the count-
down is on. Fully automatic calibration then
commences.
For this purpose, the system will transmit a
high noise level via the speakers.
Ensure that everything is as quiet as possi-
ble during this process.
Once the calibration process is complete,
the display shows “EQ-READY” and switch-
es to the last set parameter.
Checking/modifying HiFi calibration
If necessary, you can check and correct the
automatic calibration of a channel:
Press DSA briefly,
press
until “EL” appears.
The four selectable channels appear in the
display with the following characters:
EL
- front left
ER
- front right
EL
- rear left
ER
- rear right
Select the channel with / .
Select any frequency band you may
wish to correct with << >>.
The set frequency is indicated by a flashing
bar.
You can alter the adjustment of the fre-
quency band with
/ .
When modifications have been completed,
press << >> until no more frequency bands
are flashing. If necessary, alter further elec-
tronically calibrated channels as described
above. The last setting is stored automati-
cally.
Note:
All of the four loudspeakers should be con-
nected for the calibration.
If a loudspeaker is not recognized because
it is defective, not hooked up or masked, lin-
ear equalizer adjustment is made for the cor-
responding pair of loudspeakers.
Accordingly, the balance/fader setting is only
partly possible.
Recall HiFi calibration
If you wish to use one of the electronic HiFi
calibrations in reproduction:
Press DSA briefly,
Press
until “EL” appears.
Select the equalizer setting with preset
buttons 1 to 5.
Program equalizer manually
If you prefer to program the equalizer ma-
nually, you can tune in nine frequency rang-
es from 60 Hz to 16 Hz separately for the
“EQ
” front and “EQ ” rear loudspeakers.
Here, too, you can store settings for five sit-
uations (with preset buttons 1 to 5).
Press DSA briefly and
press
until “EQ” appears in the dis-
play.
San Francisco gb® 29.05.2002, 12:16 Uhr55
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt San Francisco RDM 127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt San Francisco RDM 127 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt San Francisco RDM 127

Blaupunkt San Francisco RDM 127 User Manual - German - 33 pages

Blaupunkt San Francisco RDM 127 User Manual - Dutch - 32 pages

Blaupunkt San Francisco RDM 127 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info