163729
8
Zoom out
Zoom in
Previous page
1/38
Next page
8
To “train” a new KeyCard as a replacement
for a lost or unusable KeyCard:
Insert the remaining valid KeyCard and
switch on the unit.
Press the MENU button 8.
Press the soft key 4 with the display
allocation “KC”.
Press the soft key 4 with the display
allocation “LRN”.
The display will read “LEARN KC”.
Remove the first KeyCard.
The display will read “INSERT”.
Insert the new KeyCard.
The display will read “LEARN OK”.
To exit the KeyCard menu
press the MENU button 8 or the OK
button 5.
Now the car radio can be used with two Key-
Cards again.
Lost or damaged KeyCards
If all of the KeyCards belonging to a unit have
been lost or damaged, first a new KeyCard
with the master code of the unit must be
“trained”. The master code of the unit is con-
tained in the radio pass.
Always keep the radio pass in a safe
place, but never in your vehicle.
To “train” a new KeyCard, follow the instruc-
tions given in the section “Training a new Key-
Card / entering the master code”.
If necessary, you can use this KeyCard to train
a second KeyCard. For instructions on how
to do this, read the section “Replacing / train-
ing KeyCards”.
New KeyCards can be obtained from your
dealer.
“Training” a new KeyCard /
entering the master code
If you no longer have any valid KeyCards for
your unit and want to “train” a new KeyCard:
Insert a new KeyCard that is unknown
to the unit.
Close the operating panel.
Turn off the unit if necessary.
Simultaneously hold down the TUNE
button > and the second soft key 4
from the top on the left side 2.
The display will read “0000”.
Enter the four-digit master code from the ra-
dio pass as follows:
Use the / buttons 7 to enter the
respective digits of the master code.
Press the buttons until the desired num-
ber appears on the display.
Use the buttons 7 to move from
one digit to the next during input.
Once the master code is displayed cor-
rectly, press the OK button 5.
The new KeyCard is accepted when the unit
switches to play.
Optical theft protection indicator
(LED)
The ON/OFF button and the CD bay illumi-
nation can be set to blink when the unit is off
and the KeyCard has been removed. To do
this, the menu setting “LED” must be set to
“ON”.
Press the MENU button 8.
Press the soft key 4 with the display
allocation “KC”.
Press the soft key 4 with the display
allocation “LED”.
The display will show the current status “LED
ON” or “LED OFF”.
THEFT PROTECTION
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt san francisco cd70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt san francisco cd70 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt san francisco cd70

Blaupunkt san francisco cd70 User Manual - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info