168906
28
Zoom out
Zoom in
Previous page
1/332
Next page
28
Placing the device in operation | Traffi c information
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (off) to
50 (maximum).
Turn the volume control
4 to change the
volume.
Note:
If a telephone or navigation system is connect-
ed with the car sound system as described in
the installation instructions, the car sound
system is muted in case of a telephone call
or navigation announcement and the call or
voice output is played via the loudspeakers of
the car sound system. The display then shows
"TELEPHONE".
Muting the car sound system (Mute)
You can quickly reduce the volume to a preset
level.
Briefl y press the On/Off button 3 to mute
the car sound system or to reactivate the pre-
vious volume.
While it is switched low, the display shows
"MUTE".
To adjust the mute volume, please read the sec-
tion "Performing settings in the user menu", "Mute
LVL" menu item in the chapter "User settings".
Switching demo mode on/off
The demo mode shows the functions of the car
sound system as scrolling text on the display. You
can turn the demo mode on or off:
Switch off the car sound system if it is not
already turned off.
Press and hold the buttons MENU•OK ?
and
2 < at the same time and press the On/
Off button 3.
The car sound system switches on. The dis-
play briefl y shows "DEMO MODE" if you
switched on the demo mode. By pressing any
button, the demo mode is interrupted and
you can operate the device.
u
u
u
u
Displaying version numbers
You can display the version numbers of the differ-
ent device components.
Switch off the car sound system if it is not
already turned off.
Press and hold the buttons MENU•OK ?
and
1 < at the same time and press the On/
Off button 3.
The car sound system switches on. The display
shows the version number of the fi rst compo-
nent. The fi rst character identifi es the compo-
nent: P = CPU, E = EPROM, A = Accordo.
Press the button
5 / > to display the
version number of the other components.
Press the MENU•OK
button ? to return to
the previously played audio source.
Traffi c information
In the tuner region "EUROPE", an FM station can
identify traffi c reports by means of an RDS sig-
nal. If the priority for traffi c announcements is
switched on, a traffi c announcement is automati-
cally switched through, even if the car sound sys-
tem is currently not in radio mode or if a station of
the wavebands MW or LW is set.
If priority is switched on, the display shows the
traffi c jam symbol (
). "TRAFFIC" is displayed
during a switched-through traffi c announcement.
To switch the priority on and off, please read the
section "Performing settings in the user menu",
"TRAF" menu item in the chapter "User settings".
Notes:
The volume is increased for the duration
of the switched-through traffi c announce-
ment. You can adjust the minimum vol-
ume for traffi c announcements (see the
ch. "User settings", section "Performing
settings in the user menu", "TA VOLUME"
menu item).
To cancel a switched-though traffi c an-
nouncement, press the DIS/ESC button
=.
u
u
u
u
02_SanFrancisco300_gb_0309.indd 2802_SanFrancisco300_gb_0309.indd 28 26.03.2009 13:20:27 Uhr26.03.2009 13:20:27 Uhr
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt san francisco 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt san francisco 300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info