Manual Blaupunkt Safe Drive SDC 2.0 (page 11 of 44) (English, German, Dutch, French, Italian, Polish)

790587

Zoom out

Zoom in

1/44

ENGLISH

Warranty

For products purchased within the European Union,

we provide a manufacturer‘s warranty. For devices

purchased outside the European Union, the warranty

conditions issued by our respective national represen-

tative apply.

The warranty conditions can be viewed at

www.blaupunkt.com, if no further information is given

here, the customary national legal provisions apply.

Service

Should you ever need a repair service, please contact

your Blaupunkt dealer. Further information on service

partners in your country can be found at www.blau-

punkt.com.

Replace Battery

If you operate the controller with a battery, it must be

replaced every 2-12 months (depending on usage).

Only use the battery type CR2032 / 3V:

Turn the battery compartment cover on the back of

the controller in the direction of the visible „OPEN“ ar-

row, using a straightened paper clip or needle to insert

it into the small hole in the lid, then carefully lift it o

without force.

Gently pry out the battery, avoid touching the contacts

or tabs.

Insert the new battery rst on the side with the con-

tacts (+ must be visible on the inserted battery) and

then gently push down on the opposite side until it

clicks into place.

Now replace the battery compartment cover and close

it.

Technical Data

Range

(Distance between

transmitter and receiver,

depends on environment): about 5- 10m

Power supply

Remote controller: 3V, CR2032/ 10.5 -14.4 V

Interface: 10.5 -14.4 V

Quiescent current: < 1mA

Troubleshooting

Below you will nd some error pictures and their possi-

ble solution. If you still have problems with the device,

contact your dealer or Blaupunkt Service. Please have

the installation checked or carried out by a specialist in

case of problems. Much of the problems that may arise

can be attributed to connection and operator errors.

• No function when pressing a key:

Please check the battery / power supply of the cont-

roller.

Please check the power supply of the interface.

Please check the cabling / connections.

• No or wrong function when pressing button(s):

Please re-learn the corresponding button(s) via the

menu in your car radio, please refer to the instructions

of your car radio.

• Rotary encoder does not work as desired/ programming

not possible at all:

Move the rotary encoder ⑨ during the teach-in pro-

cess only a step / click or a specic number of steps,

then check the function. Depending on the radio, it may

be necessary to program the volume to the ⑧ keys if

the encoder signals are not processed correctly. Then

use the rotary encoder for other functions such as title

jump / station change, etc..

Please try to change controller to the teach-in mode

(see chapter “Programming”)

• Remote control does not work after switching on the car

radio again and must always be reprogrammed:

Please check whether the radio is properly connected

to permanent power (battery).

Warranty | Service | Replace Battery | Technical data | Troubleshooting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Safe Drive SDC 2.0 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3.05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blaupunkt Safe Drive SDC 2.0 Manual

Product: