699019
11
Zoom out
Zoom in
Previous page
1/50
Next page
11
Blaupunkt Competence Center Sicherheitssysteme
Einfach. Professionell. Sicher.
www.blaupunkt-sicherheitssysteme.com
3.3 An den Strom anschließen
1. Stecken Sie den beigelegten Stromadapter in die Alarmanlage und in die Steckdose.
2. Schalten Sie den Batterieschalter auf „ON“, um die Batterie zu laden.
3. Die LEDs werden kurz aufleuchten, um das Aufladen anzuzeigen.
3.4 LEDs
Die LED Anzeigen zeigen/ signalisieren den aktuellen Status der Alarmzentrale.
1. Power LED
Grüne LED leuchtet: mit dem Stromnetz verbunden.
Grüne LED blinkt: keine Verbindung mit dem Stromnetz.
2. Modus LED
Rote LED leuchtet: Abwesend Scharf Modus.
Rote LED blinkt: Zuhause Modus.
Grüne LED leuchtet: Die Alarmzentrale ist im Unscharf-Modus.
Grüne LED blinkt: Die Alarmzentrale ist im Lern-Modus.
3. Fehler LED
Gelbe LED leuchtet: Es gibt mindestens einen Fehler im Alarmsystem.
Gelbe LED blinkt: Es gibt mindestens einen Fehler bei Sensoren und Bedienteilen.
4. GSM LED
Leuchtet für fünf Sekunden auf, wenn die Anlage an den Strom angeschlossen wird.
Blinkt langsam: GSM normal.
Blinkt schnell: GSM fehlgeschlagen.
3.5 Einlernen der Sensoren
Nicht im Set enthaltene Sensoren müssen in die Alarmzentrale eingespeichert bzw. eingelernt werden. Die
Alarmzentrale muss die Einstellungen der Geräte und Sensoren kennen, um das Alarmsystem optimal zu
betreiben. Zum Einlernen befolgen Sie bitte folgende Schritte:
ACHTUNG:
Die Sensoren, die das SA 2650 Kit beinhaltet, sind bereits im System gespeichert. Für diese Sensoren gehen Sie bitte direkt zum
Abschnitt Montage.
1. Lösen Sie die Schraube der Abdeckung auf der Rückseite und entfernen Sie die Abdeckung der
Alarmzentrale. Drücken Sie einmal den roten Funktionsknopf im Unscharf- Modus. Ein Signalton ertönt und
die Modus-LED blinkt. Die Alarmzentrale ist jetzt im Lernmodus.
2. Im Lernmodus drücken Sie den Lern-/Testknopf Ihres Sensors, um einen Lerncode zu übermitteln. Bitte lesen
Sie die Bedienungsanleitung des Sensors für weitere Details.
3. Die Alarmzentrale piepst einmal, wenn sie den Lerncode erhalten hat, um anzuzeigen, dass der Sensor
erfolgreich eingelernt wurde.
4. Nachdem Sie alle Sensoren eingelernt haben, drücken Sie erneut den Funktionsknopf. Erneut ertönt ein
Signal, die Modus-LED hört auf zu blinken und leuchtet dauerhaft. Die Alarmzentrale befindet sich jetzt im
Unscharf- Modus.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt SA 2650 Starter Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt SA 2650 Starter Kit in the language / languages: German as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info