716237

Blaupunkt RATK 750104 Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
SYMBOLS
Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to operate the tool more safely and effectively.
OPERATIONS
A. Pack contents 1 x Line Trimmer 1 x Safety Guard
1 x Cross Head Screw M4x25 (for fitting guard)
1 x Spool & Line (fitted)
1 x Edging wheel bracket with edging wheel
4 x Screws ST4.2x15 (for fitting the handle & safety guard )
1 x Auxiliary Handle
1 x Instruction Manual
Remove all packaging materials and the transport safeguards, if present. Keep packaging materials away from children – danger of
suffocation!
B. Replacing the spool kits.
1. Disconnect the mains plug.
2. Press together the both locking devices at the spool cover and remove the latter.
3. Remove the thread spool kits from the spool cover. 4.Remove dirt and grass residues.
5. Thread the both cutting line ends of the new spool kits through the holes of the impeller. (each one end through one hole) .
6. Firmly place the spool kits in the spool cover. Make sure that the cutting line are not caught and pull them approx. 9 cm out of
the spool.
7. Place the spool cover with spool kits on the impeller and press it firmly down until the locking devices of spool cover securely
click into place.
C. Connect the Safety guard and wheel bracket rst.
1. Align the edging wheel bracket (12) with the safety guard (11);
2. Secure the edging wheel bracket and the safety guard with three screws supplied.
3. Align the spigot of the edging wheel brace-guard assembly with the notch at the motor housing and place the bracket guard
assembly on the trimmer head.
Volts Hertz
Alternating current Watts
No load speed Revolutions or reciprocation per minute
Double insulated Regluator compliance mark
Warning Read instruction manual
Wear eye protection Do not operate in the rain
Wear hearing protection Keep bystanders away
Disconnect and discontinue use should the power-cord be damaged
V
–
Hz
W
/min
no
5124
Guide hold for replacement cutting lines.
Retaining
slots
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt RATK 750104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt RATK 750104 in the language / languages: English, German as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info