716236

Blaupunkt RATK 750103 Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
Only cut with the left (shown here as light grey) area of the cutting unit when the unit is being moved from right to left.
In the right (dark grey) area, the threads rotate in your direction. This represents a high level of kickback risk and objects may be
thrown in your direction by the rotation of the thread. You may be hurt as a result.
When the unit is moved from left to right, ensure that the thread is kept away from the grass to ensure that the grass is not thrown
up.
Cut long grasses from top to bottom to ensure that the grasses do not get tangled around the spool.
Only use the tip of the thread. This way you use less thread and avoid grass getting caught up in the spool.
Only take the thread as close as absolutely necessary to posts, walls, fences etc. Solid objects will wear the thread.
Tree trunks, young trees and bushes may be damaged by the thread.
LENGTHENING THE THREAD
When the unit no longer cuts cleanly, the threads have become too short. The best cutting results are obtained when the thread is
lengthened far enough to be cut by the blade to the correct length.
LENGTHENING THE THREAD IN CUTTING OPERATION
• Briefly tap the underside of the thread spool on the ground when the machine is running.
• If the thread is still not long enough, tap it on the ground again.
The threads will automatically be cut to the correct length by the blade.
LENGTHENING THREADS BY HAND
WARNING!
Risk of injury!
When performing work on the thread spool, always unplug from the power source!
If the threads are too short then they can not be lengthened by tapping. They must be pulled from the thread spool by hand.
• Place the unit on the floor.
• Using one hand, press the underside of the thread spool and pull both threads out until they reach slightly further than the
edge of the protective hood.
The threads will be cut to the correct length by the blade next time the unit is used.
CLEANING AND MAINTENANCE
WARNING!
Risk of injury!
Prior to conducting maintenance or cleaning: Unplug from the power source.
CLEANING AND MAINTENANCE OVERVIEW
Note: Clean unit immediately after every use. Dried grass remains are very hard, and are very dicult to remove.
CLEANING AND MAINTENANCE
Removing the thread spool
• P. 4, item 3
Press the locking mechanism (11) in.
Remove the spool housing.
Inserting the thread spool
Feed both threads in the openings of the spool housing.
Press the thread spool into the spool housing. Pull the threads out through the openings
Warning: Switch off and disconnect from mains supply before replacing, adjusting or cleaning your trimmer. Be aware that
the trimmer continues to rotate for a few more seconds after it has been switched off.
!
!
!
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt RATK 750103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt RATK 750103 in the language / languages: English, German as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info